Pioneer TS-W260S4

10″ subwoofer · 4 Ω · 350 W RMS

Fs 45 HzQts 0.83Vas 0.47 ft³Xmax 0.32″

Recommended box

For a sedan, one sub, 350 W. It’s the same math as the designer’s step-by-step mode, where you can fit the box to your space, vehicle and amp and get plans, a cut sheet and DXF.

Sealed

Net volume0.95 ft³ (27 L)
Qtc1.01
Fc55 Hz
F3 (−3 dB, no cabin gain)44 Hz
Example box (outside)12 3/16″ × 12 3/16″ × 16 1/2″
Open sealed box in designer

Ported

Net volume2.05 ft³ (58 L)
Tuning (Fb)32 Hz
Portslot 1 3/4 × 14 5/16″, 28 3/16″ long
Port velocity at 350 W59 ft/s
F3 (−3 dB, no cabin gain)27 Hz
Example box (outside)31 1/2″ × 15 3/4″ × 12 1/16″
Open ported box in designer
203040506080100150200606672788490HzdB
Sealed Ported · SPL in dB at 1 W / 1 m, no cabin gain

Thiele/Small parameters

Fs45 Hz
Qts0.83
Qes0.963
Qms6
Vas0.47 ft³
Re≈ 3.4 Ω
Sd≈ 52.7 in²
Xmax0.32″
EBP47 — suits sealed calc.
Sensitivity, 1 W / 1 m83 dB calc.

General

Size10″
Voice coils4 Ω
RMS power350 W

Mounting dimensions

Ø≈ 10 5/16″cutout ≈ Ø9 1/8″mounting depth ≈ 5 1/8″magnet Ø≈ 5 15/16″
Cutout diameter≈ 9 1/8″
Mounting depth≈ 5 1/8″

Only Qts is published — Qms assumed to be 6 and Qes calculated (barely affects box design).

“≈” means the value isn’t in the spec sheet and a typical value for the size is used; “calc.” means it’s calculated from the published parameters. Check the manufacturer’s spec sheet before you build.

Data sources

Other Pioneer 10″ models