Pioneer TS-W106M
10″ subwoofer · 4 Ω · 250 W RMS
The Pioneer TS-W106M is a 10″ subwoofer. With Qts 0.65 and EBP 48 it suits a sealed box: tight bass in a small enclosure; a ported box would need a lot of volume. Modest excursion (Xmax 0.25″) — for clean sound at moderate levels, not for SPL competitions.
| Source | pioneer-car.eu · manufacturer data |
|---|---|
| Checked against source | October 2026 |
| Thiele/Small parameters | complete |
| Mounting dimensions | 3 of 4 — missing: magnet diameter; the designer will use an estimate |
Recommended box
For a sedan, one sub, 250 W. It’s the same math as the designer’s step-by-step mode, where you can fit the box to your space, vehicle and amp and get plans, a cut sheet and DXF.
Sealed
smaller, tighter| Bass character (Qtc) | Tight and punchy · 0.91 |
|---|---|
| Fc | 45 Hz |
| F3 (−3 dB, no cabin gain) | 39 Hz |
| Example box (outside) | 12 3/16″ × 12 3/16″ × 20 11/16″ |
Ported
deeper, louder| Tuning (Fb) | 36 Hz |
|---|---|
| Port | 2 round ports Ø2 1/2″, 20 9/16″ long |
| Port velocity at 250 W | 67 ft/s |
| F3 (−3 dB, no cabin gain) | 35 Hz |
| Example box (outside) | 24 7/8″ × 15 3/4″ × 7 5/16″ |
Deeper: 2.08 ft³ (59 L) tuned to 32 Hz, 31 1/2″ × 15 3/4″ × 11 3/4″ outside — a bigger box with flatter deep bass. Open in the calculator
Projects with this subwoofer
Boxes that users designed and published: plans, cut sheet and response graph.
Thiele/Small parameters
| Size | 10″ |
|---|---|
| Voice coils | 4 Ω |
| RMS power | 250 W |
| Fs | 32.7 Hz |
| Qts | 0.65 |
| Qes | 0.68 |
| Qms | 17.1 |
| Vas | 1.14 ft³ |
| Re | 3.6 Ω |
|---|---|
| Sd | 53.7 in² |
| Xmax | 0.25″ |
| Vd | 13.3 in³ calc. |
| Mms | 125 g calc. |
| BL | 11.7 T·m calc. |
| EBP | 48 — suits sealed calc. |
| Sensitivity, 1 W / 1 m | 84.2 dB calc. |
Mounting dimensions
| Cutout diameter | 9 1/16″ |
|---|---|
| Mounting depth | 4 13/16″ |
| Overall diameter | 10 1/2″ |
Where it fits in a vehicle
Spots from our vehicle guides where the cutout, mounting depth and recommended box fit. The spot sizes are approximate — measure your own vehicle.
- F-150 SuperCrew — under the rear seat sealed and ported box
- Ram Crew Cab — under the rear seat sealed and ported box
- Tacoma Double Cab — under the rear seat sealed and ported box
- Tacoma Access Cab — behind the front seats sealed and ported box
- Bronco 4-door — behind the rear seat sealed and ported box
- Wrangler 4-door, hard top — behind the rear seat sealed and ported box
- Wrangler 4-door, soft top — behind the rear seat sealed and ported box
- Silverado / Sierra Crew Cab — under the rear seat sealed and ported box
- Avalanche — under the rear seat sealed and ported box
- FJ Cruiser — behind the rear seat sealed and ported box
- El Camino 1978–87 — behind the seat sealed and ported box
- Cherokee XJ — cargo area, spare moved out sealed and ported box
- Excursion — behind the third row sealed and ported box
- Mustang 2015–2023 coupe — trunk sealed and ported box
- Challenger / Charger — trunk sealed and ported box
- Tesla Model 3 — well under the trunk floor sealed and ported box
- Club Car Precedent — under the rear seat sealed and ported box
“≈” means the value isn’t in the spec sheet and a typical value for the size is used; “calc.” means it’s calculated from the published parameters. Check the manufacturer’s spec sheet before you build.
Data sources
- pioneer-car.eu/asset/user_manuals/UPLOAD_ID_13062/ce350de73118421e77eb1db0e535e7
- pioneer-car.eu/uk/ts-w126m/ts-w126m
Other Pioneer 10″ models
- Pioneer TS-A25S4 10″ · 4 Ω
- Pioneer TS-A250D4 10″ · dual 4 Ω
- Pioneer TS-A2500LS4 10″ · 4 Ω
- Pioneer TS-D10D2 10″ · dual 2 Ω
- Pioneer TS-D10D4 10″ · dual 4 Ω
- Pioneer TS-D10LS2 10″ · 2 Ω
- Pioneer TS-D10LS4 10″ · 4 Ω
- Pioneer TS-ME100WC 10″ · 4 Ω
- Pioneer TS-ME100WS 10″ · 4 Ω
- Pioneer TS-SW2502S4 10″ · 4 Ω
- Pioneer TS-W254F 10″ · 4 Ω
- Pioneer TS-W256R 10″ · 4 Ω
Similar 10″ subwoofers from other brands
Close in Fs, Qts and Vas — a box of similar volume will suit them.
- Polk Audio dX10-8 1.17 ft³ sealed · 0.92 ft³ ported
- MTX Audio 5510-44 1.34 ft³ sealed · 1.20 ft³ ported
- JL Audio 10W0v3-4 1.13 ft³ sealed · 1.13 ft³ ported
- MTX Audio T5510-04 1.38 ft³ sealed · 0.95 ft³ ported
- Kicker CompVR 10" 4-Ohm DVC (52CVR104) 1.27 ft³ sealed · 1.52 ft³ ported
- Polk Audio DXi104 DVC 1.24 ft³ sealed · 0.95 ft³ ported
FAQ
What box does the Pioneer TS-W106M need?
Recommended net volume: 1.24 ft³ sealed, 0.92 ft³ ported tuned to 36 Hz — for one sub in a sedan at 250 W. Fit the box to your space and amp in the free calculator, with plans and a cut sheet.
What are the Pioneer TS-W106M Thiele/Small specs?
Fs 32.7 Hz, Qts 0.65, Vas 1.14 ft³, Xmax 0.25″, Sd 53.7 in².
What is the Pioneer TS-W106M mounting depth?
Mounting depth is 4 13/16″, cutout diameter 9 1/16″. The inside depth of the box must exceed the mounting depth by at least 1″.
How much power does the Pioneer TS-W106M handle and how do I wire it?
RMS power rating: 250 W. Wiring for several subs and amp power — in the wiring calculator.
Is the Pioneer TS-W106M better sealed or ported?
EBP 48: a sealed box (1.24 ft³) suits it best — tight bass in a compact enclosure. Ported is possible (0.92 ft³, tuned to 36 Hz) but larger.
What port does the Pioneer TS-W106M need?
For the 0.92 ft³ ported box tuned to 36 Hz: 2 round ports Ø2 1/2″, 20 9/16″ long, area 10 in²; or a round port Ø3 9/16″, ≈ 19 13/16″ long. Port air speed at 250 W: 67 ft/s.
What box do two Pioneer TS-W106M subs need?
Two subs need twice the volume: 2.47 ft³ sealed, or 1.84 ft³ ported at the same 36 Hz tuning with twice the port area. One shared chamber or one per sub — whatever fits your vehicle.