Pioneer TS-ME100WC
10″ subwoofer · 4 Ω · 300 W RMS
| Source | pioneer-car.eu · manufacturer data |
|---|---|
| Checked against source | October 2026 |
| Thiele/Small parameters | complete |
| Mounting dimensions | 3 of 4 — missing: magnet diameter; the designer will use an estimate |
Recommended box
For a sedan, one sub, 300 W. It’s the same math as the designer’s step-by-step mode, where you can fit the box to your space, vehicle and amp and get plans, a cut sheet and DXF.
Sealed
smaller, tighter| Bass character (Qtc) | Boomy, with a bump · 1.11 |
|---|---|
| Fc | 65 Hz |
| F3 (−3 dB, no cabin gain) | 51 Hz |
| Example box (outside) | 12 3/16″ × 12 3/16″ × 19 1/8″ |
Ported
deeper, louder| Tuning (Fb) | 42 Hz |
|---|---|
| Port | 2 round ports Ø2 1/2″, 17 5/8″ long |
| Port velocity at 300 W | 65 ft/s |
| F3 (−3 dB, no cabin gain) | 48 Hz |
| Example box (outside) | 20 15/16″ × 15 3/4″ × 7 1/2″ |
Deeper: 1.91 ft³ (54 L) tuned to 45 Hz, 31 1/2″ × 15 3/4″ × 10 1/8″ outside — a bigger box with flatter deep bass. Open in the calculator
Projects with this subwoofer
Boxes that users designed and published: plans, cut sheet and response graph.
Thiele/Small parameters
| Size | 10″ |
|---|---|
| Voice coils | 4 Ω |
| RMS power | 300 W |
| Fs | 48 Hz |
| Qts | 0.82 |
| Qes | 0.86 |
| Qms | 16.24 |
| Vas | 0.95 ft³ |
| Re | 3.8 Ω |
|---|---|
| Sd | 49.7 in² |
| Xmax | 0.38″ |
| Vd | 18.8 in³ calc. |
| Mms | 59 g calc. |
| BL | 8.9 T·m calc. |
| EBP | 56 — sealed or ported calc. |
| Sensitivity, 1 W / 1 m | 87.4 dB calc. |
Mounting dimensions
| Cutout diameter | 8 7/8″ |
|---|---|
| Mounting depth | 4 15/16″ |
| Overall diameter | 10 3/4″ |
“≈” means the value isn’t in the spec sheet and a typical value for the size is used; “calc.” means it’s calculated from the published parameters. Check the manufacturer’s spec sheet before you build.
Data sources
Other Pioneer 10″ models
- Pioneer TS-A25S4 10″ · 4 Ω
- Pioneer TS-A250D4 10″ · dual 4 Ω
- Pioneer TS-A2500LS4 10″ · 4 Ω
- Pioneer TS-D10D2 10″ · dual 2 Ω
- Pioneer TS-D10D4 10″ · dual 4 Ω
- Pioneer TS-D10LS2 10″ · 2 Ω
- Pioneer TS-D10LS4 10″ · 4 Ω
- Pioneer TS-ME100WS 10″ · 4 Ω
- Pioneer TS-SW2502S4 10″ · 4 Ω
- Pioneer TS-W106M 10″ · 4 Ω
- Pioneer TS-W254F 10″ · 4 Ω
- Pioneer TS-W256R 10″ · 4 Ω
Similar 10″ subwoofers from other brands
Close in Fs, Qts and Vas — a box of similar volume will suit them.
- BOSS Audio D10F 1.20 ft³ sealed · 0.85 ft³ ported
- Soundstream TSQ-104 1.55 ft³ sealed · 1.09 ft³ ported
- Planet Audio AC10D 1.20 ft³ sealed · 0.85 ft³ ported
- BOSS Audio P100F 1.20 ft³ sealed · 0.85 ft³ ported
- Audiobahn AW1051Q 1.17 ft³ sealed · 0.81 ft³ ported
- Audiobahn AW1051SE 1.17 ft³ sealed · 0.81 ft³ ported
FAQ
What box does the Pioneer TS-ME100WC need?
Recommended net volume: 1.13 ft³ sealed, 0.78 ft³ ported tuned to 42 Hz — for one sub in a sedan at 300 W. Fit the box to your space and amp in the free calculator, with plans and a cut sheet.
What are the Pioneer TS-ME100WC Thiele/Small specs?
Fs 48 Hz, Qts 0.82, Vas 0.95 ft³, Xmax 0.38″, Sd 49.7 in².
What is the Pioneer TS-ME100WC mounting depth?
Mounting depth is 4 15/16″, cutout diameter 8 7/8″. The inside depth of the box must exceed the mounting depth by at least 1″.
How much power does the Pioneer TS-ME100WC handle and how do I wire it?
RMS power rating: 300 W. Wiring for several subs and amp power — in the wiring calculator.