BOSS Audio P100F

10″ subwoofer · 4 Ω · 600 W RMS

Fs 48 HzQts 0.92Vas 0.77 ft³Xmax 0.20″

Recommended box

For a sedan, one sub, 600 W. It’s the same math as the designer’s step-by-step mode, where you can fit the box to your space, vehicle and amp and get plans, a cut sheet and DXF.

Sealed

Net volume1.20 ft³ (34 L)
Qtc1.18
Fc62 Hz
F3 (−3 dB, no cabin gain)47 Hz
Example box (outside)31 1/2″ × 15 3/4″ × 6 1/2″
Open sealed box in designer

Ported

Net volume2.05 ft³ (58 L)
Tuning (Fb)42 Hz
Portslot 2 3/16 × 14 5/16″, 18 3/8″ long
Port velocity at 600 W63 ft/s
F3 (−3 dB, no cabin gain)34 Hz
Example box (outside)31 1/2″ × 15 3/4″ × 11 1/2″
Open ported box in designer
203040506080100150200667278849096HzdB
Sealed Ported · SPL in dB at 1 W / 1 m, no cabin gain

Thiele/Small parameters

Fs48 Hz
Qts0.92
Qes1.116
Qms5.18
Vas0.77 ft³
Re≈ 3.4 Ω
Sd≈ 52.7 in²
Xmax0.20″
EBP43 — suits sealed calc.
Sensitivity, 1 W / 1 m85.4 dB calc.

General

Size10″
Voice coils4 Ω
RMS power600 W

Mounting dimensions

Ø11″cutout Ø9 1/8″mounting depth 3 3/8″magnet Ø≈ 5 15/16″
Cutout diameter9 1/8″
Mounting depth3 3/8″
Overall diameter11″

“≈” means the value isn’t in the spec sheet and a typical value for the size is used; “calc.” means it’s calculated from the published parameters. Check the manufacturer’s spec sheet before you build.

Data sources

Other BOSS Audio 10″ models