BOSS Audio D10F

10″ subwoofer · 4 Ω · 400 W RMS

Fs 50 HzQts 0.81Vas 0.69 ft³Xmax 0.20″

Recommended box

For a sedan, one sub, 400 W. It’s the same math as the designer’s step-by-step mode, where you can fit the box to your space, vehicle and amp and get plans, a cut sheet and DXF.

Sealed

Net volume1.20 ft³ (34 L)
Qtc1.02
Fc63 Hz
F3 (−3 dB, no cabin gain)50 Hz
Example box (outside)31 1/2″ × 15 3/4″ × 6 1/2″
Open sealed box in designer

Ported

Net volume2.05 ft³ (58 L)
Tuning (Fb)41 Hz
Portslot 1 15/16 × 14 5/16″, 17 1/2″ long
Port velocity at 400 W60 ft/s
F3 (−3 dB, no cabin gain)34 Hz
Example box (outside)31 1/2″ × 15 3/4″ × 11 5/16″
Open ported box in designer
203040506080100150200667278849096HzdB
Sealed Ported · SPL in dB at 1 W / 1 m, no cabin gain

Thiele/Small parameters

Fs50 Hz
Qts0.81
Qes0.957
Qms5.42
Vas0.69 ft³
Re≈ 3.4 Ω
Sd≈ 52.7 in²
Xmax0.20″
EBP52 — sealed or ported calc.
Sensitivity, 1 W / 1 m86.1 dB calc.

General

Size10″
Voice coils4 Ω
RMS power400 W

Mounting dimensions

Ø10 9/16″cutout Ø9 1/8″mounting depth 3 7/8″magnet Ø≈ 5 15/16″
Cutout diameter9 1/8″
Mounting depth3 7/8″
Overall diameter10 9/16″

“≈” means the value isn’t in the spec sheet and a typical value for the size is used; “calc.” means it’s calculated from the published parameters. Check the manufacturer’s spec sheet before you build.

Data sources

Other BOSS Audio 10″ models