Audiobahn AW1051T
10″ subwoofer · dual 4 Ω · 300 W RMS
| Source | web.archive.org · manufacturer data |
|---|---|
| Checked against source | October 2026 |
| Thiele/Small parameters | complete |
| Mounting dimensions | 3 of 4 — missing: magnet diameter; the designer will use an estimate |
Recommended box
For a sedan, one sub, 300 W. It’s the same math as the designer’s step-by-step mode, where you can fit the box to your space, vehicle and amp and get plans, a cut sheet and DXF.
Sealed
smaller, tighter| Bass character (Qtc) | Boomy, with a bump · 1.04 |
|---|---|
| Fc | 54 Hz |
| F3 (−3 dB, no cabin gain) | 43 Hz |
| Example box (outside) | 12 3/16″ × 12 3/16″ × 19 11/16″ |
Ported
deeper, louder| Tuning (Fb) | 42 Hz |
|---|---|
| Port | 2 round ports Ø2 1/2″, 16 3/4″ long |
| Port velocity at 300 W | 72 ft/s |
| F3 (−3 dB, no cabin gain) | 39 Hz |
| Example box (outside) | 22 7/8″ × 15 3/4″ × 7 1/16″ |
Deeper: 1.98 ft³ (56 L) tuned to 36 Hz, 31 1/2″ × 15 3/4″ × 11″ outside — a bigger box with flatter deep bass. Open in the calculator
Projects with this subwoofer
Boxes that users designed and published: plans, cut sheet and response graph.
Thiele/Small parameters
| Size | 10″ |
|---|---|
| Voice coils | dual 4 Ω |
| RMS power | 300 W |
| Fs | 42.7 Hz |
| Qts | 0.82 |
| Qes | 0.96 |
| Qms | 5.64 |
| Vas | 0.71 ft³ |
| Re (one coil) | 3 Ω |
|---|---|
| Sd | 51.2 in² |
| Xmax | 0.28″ |
| Vd | 14.1 in³ calc. |
| Mms | 107 g calc. |
| BL | 9.5 T·m calc. |
| EBP | 44 — suits sealed calc. |
| Sensitivity, 1 W / 1 m | 84.1 dB calc. |
Mounting dimensions
| Cutout diameter | 9″ |
|---|---|
| Mounting depth | 4 5/8″ |
| Overall diameter | 10 1/4″ |
“≈” means the value isn’t in the spec sheet and a typical value for the size is used; “calc.” means it’s calculated from the published parameters. Check the manufacturer’s spec sheet before you build.
Data sources
- web.archive.org/web/20060317155859/http://www.audiobahn.com/Audiobahn06/images/t
- web.archive.org/web/20060317160229/http://www.audiobahn.com/Audiobahn06/images/t
- web.archive.org/web/20060317161924/http://www.audiobahn.com/Audiobahn06/images/t
Other Audiobahn 10″ models
- Audiobahn ALUM10 10″
- Audiobahn ALUM10N 10″ · dual 6 Ω
- Audiobahn ALUM10Q 10″ · dual 6 Ω
- Audiobahn ALUM10X 10″
- Audiobahn AW100Q 10″
- Audiobahn AW100SVC 10″
- Audiobahn AW100T 10″ · 4 Ω
- Audiobahn AW100XS 10″
- Audiobahn AW101T 10″ · 4 Ω
- Audiobahn AW1000 10″
- Audiobahn AW1000N 10″
- Audiobahn AW1000Q 10″
Similar 10″ subwoofers from other brands
Close in Fs, Qts and Vas — a box of similar volume will suit them.
- Kicker CompVR 10" 2-Ohm DVC (43CVR102) 1.24 ft³ sealed · 0.88 ft³ ported
- Pioneer TS-W261S4 1.24 ft³ sealed · 0.88 ft³ ported
- BOSS Audio D10F 1.20 ft³ sealed · 0.85 ft³ ported
- Pioneer TS-D10LS4 1.20 ft³ sealed · 0.85 ft³ ported
- Pioneer TS-D10D4 1.20 ft³ sealed · 0.81 ft³ ported
- Pioneer TS-A2500LS4 1.20 ft³ sealed · 0.85 ft³ ported
FAQ
What box does the Audiobahn AW1051T need?
Recommended net volume: 1.17 ft³ sealed, 0.81 ft³ ported tuned to 42 Hz — for one sub in a sedan at 300 W. Fit the box to your space and amp in the free calculator, with plans and a cut sheet.
What are the Audiobahn AW1051T Thiele/Small specs?
Fs 42.7 Hz, Qts 0.82, Vas 0.71 ft³, Xmax 0.28″, Sd 51.2 in².
What is the Audiobahn AW1051T mounting depth?
Mounting depth is 4 5/8″, cutout diameter 9″. The inside depth of the box must exceed the mounting depth by at least 1″.
How much power does the Audiobahn AW1051T handle and how do I wire it?
RMS power rating: 300 W. Dual 4 Ω voice coils: series gives 8 Ω, parallel gives 2 Ω at the amp. Wiring for several subs and amp power — in the wiring calculator.