Audiobahn ALUM10N
10″ subwoofer · dual 6 Ω · 800 W RMS
| Source | web.archive.org · manufacturer data |
|---|---|
| Checked against source | October 2026 |
| Thiele/Small parameters | complete |
| Mounting dimensions | 3 of 4 — missing: magnet diameter; the designer will use an estimate |
Recommended box
For a sedan, one sub, 800 W. It’s the same math as the designer’s step-by-step mode, where you can fit the box to your space, vehicle and amp and get plans, a cut sheet and DXF.
Sealed
smaller, tighter| Bass character (Qtc) | Tight and punchy · 0.79 |
|---|---|
| Fc | 45 Hz |
| F3 (−3 dB, no cabin gain) | 43 Hz |
| Example box (outside) | 12 5/8″ × 12 5/8″ × 11 1/16″ |
Ported
deeper, louder| Tuning (Fb) | 34 Hz |
|---|---|
| Port | 2 round ports Ø2 1/2″, 21 1/2″ long |
| Port velocity at 800 W | 138 ft/s |
| F3 (−3 dB, no cabin gain) | 31 Hz |
| Example box (outside) | 25 5/8″ × 15 3/4″ × 7 1/2″ |
At 800 W this example’s port will be noisy: air speed 138 ft/s, while the limit is 82 ft/s. It stays quiet up to about 280 W. Full power needs a port of at least 16.8 in², which means a bigger box than this example — size it in the designer.
Open ported box in designerDeeper: 1.98 ft³ (56 L) tuned to 25 Hz, 31 1/2″ × 15 3/4″ × 12 7/8″ outside — a bigger box with flatter deep bass. Open in the calculator
Projects with this subwoofer
Boxes that users designed and published: plans, cut sheet and response graph.
Thiele/Small parameters
| Size | 10″ |
|---|---|
| Voice coils | dual 6 Ω |
| RMS power | 800 W |
| Fs | 26.4 Hz |
| Qts | 0.46 |
| Qes | 0.51 |
| Qms | 4.9 |
| Vas | 1.24 ft³ |
| Re (one coil) | 6 Ω |
|---|---|
| Sd | 51.2 in² |
| Xmax | 0.51″ |
| Vd | 26.2 in³ calc. |
| Mms | 160 g calc. |
| BL | 17.7 T·m calc. |
| EBP | 52 — sealed or ported calc. |
| Sensitivity, 1 W / 1 m | 83 dB calc. |
Mounting dimensions
| Cutout diameter | 9 1/4″ |
|---|---|
| Mounting depth | 5″ |
| Overall diameter | 10 7/8″ |
“≈” means the value isn’t in the spec sheet and a typical value for the size is used; “calc.” means it’s calculated from the published parameters. Check the manufacturer’s spec sheet before you build.
Data sources
Other Audiobahn 10″ models
- Audiobahn ALUM10 10″
- Audiobahn ALUM10Q 10″ · dual 6 Ω
- Audiobahn ALUM10X 10″
- Audiobahn AW100Q 10″
- Audiobahn AW100SVC 10″
- Audiobahn AW100T 10″ · 4 Ω
- Audiobahn AW100XS 10″
- Audiobahn AW101T 10″ · 4 Ω
- Audiobahn AW1000 10″
- Audiobahn AW1000N 10″
- Audiobahn AW1000Q 10″
- Audiobahn AW1000V 10″ · dual 4 Ω
Similar 10″ subwoofers from other brands
Close in Fs, Qts and Vas — a box of similar volume will suit them.
- Rockford Fosgate Punch HE2 RFP4210 0.64 ft³ sealed · 0.95 ft³ ported
- Dayton Audio RSS265HO-44 0.57 ft³ sealed · 1.52 ft³ ported
- Rockford Fosgate Punch HE2 RFP4110 0.57 ft³ sealed · 0.92 ft³ ported
- PSI Platform 1 10 D2 0.88 ft³ sealed · 1.02 ft³ ported
- JL Audio 10W6v2-D4 0.64 ft³ sealed · 0.95 ft³ ported
- Sundown Audio SDv3-10 D4 0.64 ft³ sealed · 1.09 ft³ ported
FAQ
What box does the Audiobahn ALUM10N need?
Recommended net volume: 0.64 ft³ sealed, 0.99 ft³ ported tuned to 34 Hz — for one sub in a sedan at 800 W. Fit the box to your space and amp in the free calculator, with plans and a cut sheet.
What are the Audiobahn ALUM10N Thiele/Small specs?
Fs 26.4 Hz, Qts 0.46, Vas 1.24 ft³, Xmax 0.51″, Sd 51.2 in².
What is the Audiobahn ALUM10N mounting depth?
Mounting depth is 5″, cutout diameter 9 1/4″. The inside depth of the box must exceed the mounting depth by at least 1″.
How much power does the Audiobahn ALUM10N handle and how do I wire it?
RMS power rating: 800 W. Dual 6 Ω voice coils: series gives 12 Ω, parallel gives 3 Ω at the amp. Wiring for several subs and amp power — in the wiring calculator.