Audiobahn AW100XS

10″ subwoofer · 400 W RMS

30.5 HzFs, resonance
0.32Qts
1.02 ft³Vas
0.39″Xmax
400 WRMS

The Audiobahn AW100XS is a 10″ subwoofer. With Qts 0.32 and EBP 87 it works both sealed and ported: sealed is tighter and smaller, ported is deeper and louder.

Sourceweb.archive.org · manufacturer data
Checked against sourceOctober 2026
Thiele/Small parametersnot in the spec sheet: Sd — typical value for the size used
Mounting dimensions3 of 4 — missing: magnet diameter; the designer will use an estimate

Recommended box

For a sedan, one sub, 400 W. It’s the same math as the designer’s step-by-step mode, where you can fit the box to your space, vehicle and amp and get plans, a cut sheet and DXF.

Sealed

smaller, tighter
0.49 ft³ (14 L)
Net volume
Bass character (Qtc)Dry and tight · 0.57
Fc53 Hz
F3 (−3 dB, no cabin gain)72 Hz
Example box (outside)12 3/16″ × 12 3/16″ × 9 11/16″
Open sealed box in designer

Ported

deeper, louder
1.55 ft³ (44 L)
Net volume
Tuning (Fb)34 Hz
Portslot 1 9/16 × 14 5/16″, 29 11/16″ long
Port velocity at 400 W65 ft/s
F3 (−3 dB, no cabin gain)31 Hz
Example box (outside)31 1/2″ × 15 3/4″ × 10 1/16″
Open ported box in designer

Deeper: 1.02 ft³ (29 L) tuned to 32 Hz, 31 1/2″ × 15 3/4″ × 8 1/8″ outside — a bigger box with flatter deep bass. Open in the calculator

Where to buy Amazon
203040506080100150200606672788490HzdB
Sealed Ported · SPL in dB at 1 W / 1 m, no cabin gain

Thiele/Small parameters

Size10″
Voice coils—
RMS power400 W
Fs30.5 Hz
Qts0.32
Qes0.35
Qms4.4
Vas1.02 ft³
Re3.3 Ω
Sd≈ 52.7 in²
Xmax0.39″
EBP87 — sealed or ported calc.
Sensitivity, 1 W / 1 m85.7 dB calc.

Mounting dimensions

Ø10 1/4″cutout Ø9″mounting depth 5″magnet Ø≈ 5 7/8″
Cutout diameter9″
Mounting depth5″
Overall diameter10 1/4″

Where it fits in a vehicle

Spots from our vehicle guides where the cutout, mounting depth and recommended box fit. The spot sizes are approximate — measure your own vehicle.

“≈” means the value isn’t in the spec sheet and a typical value for the size is used; “calc.” means it’s calculated from the published parameters. Check the manufacturer’s spec sheet before you build.

Data sources

Other Audiobahn 10″ models

Similar 10″ subwoofers from other brands

Close in Fs, Qts and Vas — a box of similar volume will suit them.

FAQ

What box does the Audiobahn AW100XS need?

Recommended net volume: 0.49 ft³ sealed, 1.55 ft³ ported tuned to 34 Hz — for one sub in a sedan at 400 W. Fit the box to your space and amp in the free calculator, with plans and a cut sheet.

What are the Audiobahn AW100XS Thiele/Small specs?

Fs 30.5 Hz, Qts 0.32, Vas 1.02 ft³, Xmax 0.39″.

What is the Audiobahn AW100XS mounting depth?

Mounting depth is 5″, cutout diameter 9″. The inside depth of the box must exceed the mounting depth by at least 1″.

How much power does the Audiobahn AW100XS handle and how do I wire it?

RMS power rating: 400 W. Wiring for several subs and amp power — in the wiring calculator.

Is the Audiobahn AW100XS better sealed or ported?

EBP 87: both work — sealed 0.49 ft³ is tighter and smaller, ported 1.55 ft³ tuned to 34 Hz is deeper and louder.

What port does the Audiobahn AW100XS need?

For the 1.55 ft³ ported box tuned to 34 Hz: slot 1 9/16 × 14 5/16″, 29 11/16″ long, area 22.6 in²; or a round port Ø5 3/8″, ≈ 29 11/16″ long. Port air speed at 400 W: 65 ft/s.

What box do two Audiobahn AW100XS subs need?

Two subs need twice the volume: 0.99 ft³ sealed, or 3.11 ft³ ported at the same 34 Hz tuning with twice the port area. One shared chamber or one per sub — whatever fits your vehicle.