Infinity Kappa 1000W (SSI 2 ohm)

10″ subwoofer · 2 Ω · 450 W RMS

Fs 30.5 HzQts 0.37Vas 0.96 ft³Xmax 0.41″

Recommended box

For a sedan, one sub, 450 W. It’s the same math as the designer’s step-by-step mode, where you can fit the box to your space, vehicle and amp and get plans, a cut sheet and DXF.

Sealed

Net volume0.48 ft³ (13.5 L)
Qtc0.64
Fc53 Hz
F3 (−3 dB, no cabin gain)62 Hz
Example box (outside)12 3/16″ × 12 3/16″ × 9 7/16″
Open sealed box in designer

Ported

Net volume0.99 ft³ (28 L)
Tuning (Fb)32 Hz
Portround port Ø3″, 16 3/8″ long
Port velocity at 450 W152 ft/s
F3 (−3 dB, no cabin gain)31 Hz
Example box (outside)19 3/16″ × 15 3/4″ × 9 1/4″
Open ported box in designer
2030405060801001502006066727884HzdB
Sealed Ported · SPL in dB at 1 W / 1 m, no cabin gain

Thiele/Small parameters

Fs30.5 Hz
Qts0.37
Qes0.408
Qms4
Vas0.96 ft³
Re2 Ω
Sd51.2 in²
Xmax0.41″
Vd20.7 in³ calc.
Mms155 g calc.
BL12.1 T·m calc.
EBP75 — sealed or ported calc.
Sensitivity, 1 W / 1 m84.8 dB calc.

General

Size10″
Voice coils2 Ω
RMS power450 W

Mounting dimensions

Ø10 5/8″cutout Ø9 1/8″mounting depth 6 13/16″magnet Ø≈ 5 15/16″
Cutout diameter9 1/8″
Mounting depth6 13/16″
Overall diameter10 5/8″

“≈” means the value isn’t in the spec sheet and a typical value for the size is used; “calc.” means it’s calculated from the published parameters. Check the manufacturer’s spec sheet before you build.

Data sources

Other Infinity 10″ models