MTX Audio T5510-04

10″ subwoofer · 4 Ω · 300 W RMS

Fs 35.3 HzQts 0.67Vas 1.08 ft³Xmax 0.53″

Recommended box

For a sedan, one sub, 300 W. It’s the same math as the designer’s step-by-step mode, where you can fit the box to your space, vehicle and amp and get plans, a cut sheet and DXF.

Sealed

Net volume1.38 ft³ (39 L)
Qtc0.89
Fc47 Hz
F3 (−3 dB, no cabin gain)41 Hz
Example box (outside)12 3/16″ × 12 3/16″ × 22 13/16″
Open sealed box in designer

Ported

Net volume2.33 ft³ (66 L)
Tuning (Fb)32 Hz
Portslot 1 9/16 × 14 5/16″, 21 3/8″ long
Port velocity at 300 W58 ft/s
F3 (−3 dB, no cabin gain)28 Hz
Example box (outside)31 1/2″ × 15 3/4″ × 12 1/2″
Open ported box in designer
203040506080100150200606672788490HzdB
Sealed Ported · SPL in dB at 1 W / 1 m, no cabin gain

Thiele/Small parameters

Fs35.3 Hz
Qts0.67
Qes0.79
Qms4.37
Vas1.08 ft³
Re3.28 Ω
Sd60.1 in²
Xmax0.53″
Vd32 in³ calc.
Mms142 g calc.
BL11.4 T·m calc.
EBP45 — suits sealed calc.
Sensitivity, 1 W / 1 m84.3 dB calc.

General

Size10″
Voice coils4 Ω
RMS power300 W

Mounting dimensions

Ø10 11/16″cutout Ø9 1/8″mounting depth 6 1/8″magnet Ø≈ 5 15/16″
Cutout diameter9 1/8″
Mounting depth6 1/8″
Overall diameter10 11/16″

“≈” means the value isn’t in the spec sheet and a typical value for the size is used; “calc.” means it’s calculated from the published parameters. Check the manufacturer’s spec sheet before you build.

Data sources

Other MTX Audio 10″ models