Clarion WF2520

10″ subwoofer · 4 Ω · 300 W RMS

Fs 45 HzQts 0.74Vas 0.57 ft³Xmax 0.20″

Recommended box

For a sedan, one sub, 300 W. It’s the same math as the designer’s step-by-step mode, where you can fit the box to your space, vehicle and amp and get plans, a cut sheet and DXF.

Sealed

Net volume1.13 ft³ (32 L)
Qtc0.90
Fc55 Hz
F3 (−3 dB, no cabin gain)47 Hz
Example box (outside)31 1/2″ × 15 3/4″ × 6 3/16″
Open sealed box in designer

Ported

Net volume2.01 ft³ (57 L)
Tuning (Fb)34 Hz
Portslot 1 9/16 × 14 5/16″, 22″ long
Port velocity at 300 W63 ft/s
F3 (−3 dB, no cabin gain)29 Hz
Example box (outside)31 1/2″ × 15 3/4″ × 11 5/16″
Open ported box in designer
203040506080100150200606672788490HzdB
Sealed Ported · SPL in dB at 1 W / 1 m, no cabin gain

Thiele/Small parameters

Fs45 Hz
Qts0.74
Qes0.844
Qms5.81
Vas0.57 ft³
Re3.6 Ω
Sd52.2 in²
Xmax0.20″
Vd10.3 in³ calc.
Mms125 g calc.
BL12.3 T·m calc.
EBP53 — sealed or ported calc.
Sensitivity, 1 W / 1 m84.4 dB calc.

General

Size10″
Voice coils4 Ω
RMS power300 W

Mounting dimensions

Ø10 1/4″cutout Ø9 3/16″mounting depth 3 1/8″magnet Ø≈ 6″
Cutout diameter9 3/16″
Mounting depth3 1/8″
Overall diameter10 1/4″

“≈” means the value isn’t in the spec sheet and a typical value for the size is used; “calc.” means it’s calculated from the published parameters. Check the manufacturer’s spec sheet before you build.

Data sources

Other Clarion 10″ models