Clarion WQ2510D
10″ subwoofer · dual 4 Ω · 500 W RMS
Fs 35 HzQts 0.65Vas 0.65 ft³
Recommended box
For a sedan, one sub, 500 W. It’s the same math as the designer’s step-by-step mode, where you can fit the box to your space, vehicle and amp and get plans, a cut sheet and DXF.
Sealed
| Net volume | 1.09 ft³ (31 L) |
|---|---|
| Qtc | 0.82 |
| Fc | 44 Hz |
| F3 (−3 dB, no cabin gain) | 40 Hz |
| Example box (outside) | 12 5/8″ × 12 5/8″ × 17 7/16″ |
Ported
| Net volume | 1.87 ft³ (53 L) |
|---|---|
| Tuning (Fb) | 28 Hz |
| Port | slot 1 3/4 × 14 5/16″, 42 1/16″ long |
| Port velocity at 500 W | 63 ft/s |
| F3 (−3 dB, no cabin gain) | 24 Hz |
| Example box (outside) | 31 1/2″ × 15 3/4″ × 12 1/2″ |
Thiele/Small parameters
| Fs | 35 Hz |
|---|---|
| Qts | 0.65 |
| Qes | 0.729 |
| Qms | 6 |
| Vas | 0.65 ft³ |
| Re (one coil) | ≈ 3.4 Ω |
| Sd | 48.7 in² |
| Xmax | ≈ 0.39″ |
| Mms | 156 g calc. |
| BL | 12.7 T·m calc. |
| EBP | 48 — suits sealed calc. |
| Sensitivity, 1 W / 1 m | 82.4 dB calc. |
General
| Size | 10″ |
|---|---|
| Voice coils | dual 4 Ω |
| RMS power | 500 W |
Mounting dimensions
| Cutout diameter | ≈ 9 5/8″ |
|---|---|
| Mounting depth | ≈ 5 1/8″ |
| Overall diameter | 10 11/16″ |
Only Qts is published — Qms assumed to be 6 and Qes calculated (barely affects box design).
“≈” means the value isn’t in the spec sheet and a typical value for the size is used; “calc.” means it’s calculated from the published parameters. Check the manufacturer’s spec sheet before you build.
Data sources
- archive.clarion.com/xl/en/pdf/WQ2510D_Manual.pdf
- archive.clarion.com/xl/en/products-personal/past-products/speaker/WQ2510D/index.
Other Clarion 10″ models
- Clarion SW2511 10″ · 4 Ω
- Clarion WF2520 10″ · 4 Ω
- Clarion WF2520D 10″ · dual 4 Ω
- Clarion WG2520 10″ · 4 Ω
- Clarion WG2520D 10″ · dual 4 Ω