Diamond H102

10″ subwoofer · dual 2 Ω · 500 W RMS

Fs 27 HzQts 0.38Vas 0.63 ft³Xmax 0.70″

Recommended box

For a sedan, one sub, 500 W. It’s the same math as the designer’s step-by-step mode, where you can fit the box to your space, vehicle and amp and get plans, a cut sheet and DXF.

Sealed

Net volume0.48 ft³ (13.5 L)
Qtc0.58
Fc41 Hz
F3 (−3 dB, no cabin gain)54 Hz
Example box (outside)12 3/16″ × 12 3/16″ × 9 7/16″
Open sealed box in designer

Ported

Net volume0.95 ft³ (27 L)
Tuning (Fb)29 Hz
Portround port Ø2 1/2″, 14 3/4″ long
Port velocity at 500 W230 ft/s
F3 (−3 dB, no cabin gain)26 Hz
Example box (outside)17 13/16″ × 15 3/4″ × 9 7/16″
Open ported box in designer
2030405060801001502006066727884HzdB
Sealed Ported · SPL in dB at 1 W / 1 m, no cabin gain

Thiele/Small parameters

Fs27 Hz
Qts0.38
Qes0.42
Qms4
Vas0.63 ft³
Re (one coil)2 Ω
Sd49.6 in²
Xmax0.70″
Vd34.8 in³ calc.
Mms282 g calc.
BL15.1 T·m calc.
EBP64 — sealed or ported calc.
Sensitivity, 1 W / 1 m81.2 dB calc.

General

Size10″
Voice coilsdual 2 Ω
RMS power500 W

Mounting dimensions

Ø10 3/4″cutout Ø9″mounting depth 7″magnet Ø≈ 5 13/16″
Cutout diameter9″
Mounting depth7″
Overall diameter10 3/4″

“≈” means the value isn’t in the spec sheet and a typical value for the size is used; “calc.” means it’s calculated from the published parameters. Check the manufacturer’s spec sheet before you build.

Data sources

Other Diamond 10″ models