Audiobahn AWP310X
10″ subwoofer · 1,000 W RMS
The Audiobahn AWP310X is a 10″ subwoofer. With Qts 0.34 and EBP 74 it works both sealed and ported: sealed is tighter and smaller, ported is deeper and louder.
| Source | web.archive.org · manufacturer data |
|---|---|
| Checked against source | October 2026 |
| Thiele/Small parameters | not in the spec sheet: Sd — typical value for the size used |
| Mounting dimensions | 3 of 4 — missing: magnet diameter; the designer will use an estimate |
Recommended box
For a sedan, one sub, 1,000 W. It’s the same math as the designer’s step-by-step mode, where you can fit the box to your space, vehicle and amp and get plans, a cut sheet and DXF.
Sealed
smaller, tighter| Bass character (Qtc) | Dry and tight · 0.49 |
|---|---|
| Fc | 38 Hz |
| F3 (−3 dB, no cabin gain) | 64 Hz |
| Example box (outside) | 12 5/8″ × 12 5/8″ × 9 1/8″ |
Ported
deeper, louder| Tuning (Fb) | 30 Hz |
|---|---|
| Port | slot 1 3/4 × 14 5/16″, 44 3/8″ long |
| Port velocity at 1,000 W | 88 ft/s |
| F3 (−3 dB, no cabin gain) | 26 Hz |
| Example box (outside) | 31 1/2″ × 15 3/4″ × 11 3/8″ |
At 1,000 W this example’s port will be noisy: air speed 88 ft/s, while the limit is 82 ft/s. It stays quiet up to about 870 W. Full power needs a port of at least 27.1 in², which means a bigger box than this example — size it in the designer.
Open ported box in designerDeeper: 1.02 ft³ (29 L) tuned to 29 Hz, 22 5/8″ × 15 3/4″ × 8 1/4″ outside — a bigger box with flatter deep bass. Open in the calculator
Projects with this subwoofer
Boxes that users designed and published: plans, cut sheet and response graph.
Thiele/Small parameters
| Size | 10″ |
|---|---|
| Voice coils | — |
| RMS power | 1,000 W |
| Fs | 27.2 Hz |
| Qts | 0.34 |
| Qes | 0.37 |
| Qms | 4.7 |
| Vas | 0.49 ft³ |
|---|---|
| Re | 2.05 Ω |
| Sd | ≈ 52.7 in² |
| Xmax | 0.59″ |
| EBP | 74 — sealed or ported calc. |
| Sensitivity, 1 W / 1 m | 80.8 dB calc. |
Mounting dimensions
| Cutout diameter | 9 1/4″ |
|---|---|
| Mounting depth | 5 3/4″ |
| Overall diameter | 10 7/8″ |
Where it fits in a vehicle
Spots from our vehicle guides where the cutout, mounting depth and recommended box fit. The spot sizes are approximate — measure your own vehicle.
- F-150 SuperCrew — under the rear seat sealed and ported box
- Ram Crew Cab — under the rear seat sealed and ported box
- Tacoma Double Cab — under the rear seat sealed box
- Bronco 4-door — behind the rear seat sealed and ported box
- Wrangler 4-door, hard top — behind the rear seat sealed and ported box
- Wrangler 4-door, soft top — behind the rear seat sealed and ported box
- Silverado / Sierra Crew Cab — under the rear seat sealed and ported box
- Spare tire well sealed box
- Polaris RZR / Ranger — under the seat sealed box
- Can-Am — under the seat sealed box
- FJ Cruiser — behind the rear seat sealed and ported box
- El Camino 1978–87 — behind the seat sealed and ported box
- Cherokee XJ — cargo area, spare moved out sealed and ported box
- Excursion — behind the third row sealed and ported box
- Mustang 2015–2023 coupe — trunk sealed and ported box
- Challenger / Charger — trunk sealed and ported box
- Tesla Model 3 — well under the trunk floor sealed box
- Club Car Precedent — under the rear seat sealed and ported box
“≈” means the value isn’t in the spec sheet and a typical value for the size is used; “calc.” means it’s calculated from the published parameters. Check the manufacturer’s spec sheet before you build.
Data sources
Other Audiobahn 10″ models
- Audiobahn ALUM10 10″
- Audiobahn ALUM10N 10″ · dual 6 Ω
- Audiobahn ALUM10Q 10″ · dual 6 Ω
- Audiobahn ALUM10X 10″
- Audiobahn AW100Q 10″
- Audiobahn AW100SVC 10″
- Audiobahn AW100T 10″ · 4 Ω
- Audiobahn AW100XS 10″
- Audiobahn AW101T 10″ · 4 Ω
- Audiobahn AW1000 10″
- Audiobahn AW1000N 10″
- Audiobahn AW1000Q 10″
Similar 10″ subwoofers from other brands
Close in Fs, Qts and Vas — a box of similar volume will suit them.
- Rockford Fosgate Power HX2 RFR3110 0.49 ft³ sealed · 1.59 ft³ ported
- Diamond H102 0.48 ft³ sealed · 1.48 ft³ ported
- Rockville PUNISHER 10D1 0.58 ft³ sealed · 1.52 ft³ ported
- DL Audio Phoenix Black Bass 10 (2+2) 0.49 ft³ sealed · 0.85 ft³ ported
- Phoenix Gold Ti310D2 (Ti3, DVC 2 ohm) 0.46 ft³ sealed · 0.81 ft³ ported
- DD Audio 710g D2 0.62 ft³ sealed · 1.38 ft³ ported
FAQ
What box does the Audiobahn AWP310X need?
Recommended net volume: 0.49 ft³ sealed, 1.55 ft³ ported tuned to 30 Hz — for one sub in a sedan at 1,000 W. Fit the box to your space and amp in the free calculator, with plans and a cut sheet.
What are the Audiobahn AWP310X Thiele/Small specs?
Fs 27.2 Hz, Qts 0.34, Vas 0.49 ft³, Xmax 0.59″.
What is the Audiobahn AWP310X mounting depth?
Mounting depth is 5 3/4″, cutout diameter 9 1/4″. The inside depth of the box must exceed the mounting depth by at least 1″.
How much power does the Audiobahn AWP310X handle and how do I wire it?
RMS power rating: 1,000 W. Wiring for several subs and amp power — in the wiring calculator.
Is the Audiobahn AWP310X better sealed or ported?
EBP 74: both work — sealed 0.49 ft³ is tighter and smaller, ported 1.55 ft³ tuned to 30 Hz is deeper and louder.
What port does the Audiobahn AWP310X need?
For the 1.55 ft³ ported box tuned to 30 Hz: slot 1 3/4 × 14 5/16″, 44 3/8″ long, area 25.4 in²; or a round port Ø5 11/16″, ≈ 44 3/8″ long. Port air speed at 1,000 W: 88 ft/s.
What box do two Audiobahn AWP310X subs need?
Two subs need twice the volume: 0.99 ft³ sealed, or 3.11 ft³ ported at the same 30 Hz tuning with twice the port area. One shared chamber or one per sub — whatever fits your vehicle.