Dayton Audio SS10-22

10″ subwoofer · dual 2 Ω · 700 W RMS

Fs 34 HzQts 0.40Vas 0.73 ft³Xmax 0.83″

Recommended box

For a sedan, one sub, 700 W. It’s the same math as the designer’s step-by-step mode, where you can fit the box to your space, vehicle and amp and get plans, a cut sheet and DXF.

Sealed

Net volume0.53 ft³ (15 L)
Qtc0.62
Fc52 Hz
F3 (−3 dB, no cabin gain)63 Hz
Example box (outside)12 5/8″ × 12 5/8″ × 9 5/8″
Open sealed box in designer

Ported

Net volume1.02 ft³ (29 L)
Tuning (Fb)32 Hz
Portround port Ø3″, 15 3/4″ long
Port velocity at 700 W197 ft/s
F3 (−3 dB, no cabin gain)30 Hz
Example box (outside)19 1/4″ × 15 3/4″ × 9 7/16″
Open ported box in designer
2030405060801001502006066727884HzdB
Sealed Ported · SPL in dB at 1 W / 1 m, no cabin gain

Thiele/Small parameters

Fs34 Hz
Qts0.40
Qes0.45
Qms3.8
Vas0.73 ft³
Re (one coil)2.2 Ω
Sd53.4 in²
Xmax0.83″
Vd44.1 in³ calc.
Mms179 g calc.
BL13.7 T·m calc.
EBP76 — sealed or ported calc.
Sensitivity, 1 W / 1 m84.6 dB calc.

General

Size10″
Voice coilsdual 2 Ω
RMS power700 W

Mounting dimensions

Ø10 1/2″cutout Ø9 5/16″mounting depth 7 1/16″magnet Ø≈ 6 1/16″
Cutout diameter9 5/16″
Mounting depth7 1/16″
Overall diameter10 1/2″

“≈” means the value isn’t in the spec sheet and a typical value for the size is used; “calc.” means it’s calculated from the published parameters. Check the manufacturer’s spec sheet before you build.

Data sources

Other Dayton Audio 10″ models