Zetta Audio V-10 EVO 1100
10″ subwoofer · dual 4 Ω · 1,100 W RMS
The Zetta Audio V-10 EVO 1100 is a 10″ subwoofer. With Qts 0.36 and EBP 97 it works both sealed and ported: sealed is tighter and smaller, ported is deeper and louder. Long excursion (Xmax 0.71″) — built for loud music and high power.
| Source | zettaaudio.com.br · manufacturer data |
|---|---|
| Checked against source | October 2026 |
| Thiele/Small parameters | complete |
| Mounting dimensions | 3 of 4 — missing: magnet diameter; the designer will use an estimate |
Recommended box
For a sedan, one sub, 1,100 W. It’s the same math as the designer’s step-by-step mode, where you can fit the box to your space, vehicle and amp and get plans, a cut sheet and DXF.
Sealed
smaller, tighter| Bass character (Qtc) | Dry and tight · 0.48 |
|---|---|
| Fc | 49 Hz |
| F3 (−3 dB, no cabin gain) | 83 Hz |
| Example box (outside) | 12 5/8″ × 12 5/8″ × 9 3/8″ |
Ported
deeper, louder| Tuning (Fb) | 38 Hz |
|---|---|
| Port | slot 2 3/4 × 14 5/16″, 44 1/8″ long |
| Port velocity at 1,100 W | 66 ft/s |
| F3 (−3 dB, no cabin gain) | 33 Hz |
| Example box (outside) | 31 1/2″ × 15 3/4″ × 12 7/16″ |
Deeper: 0.95 ft³ (27 L) tuned to 36 Hz, 17 9/16″ × 15 3/4″ × 9 7/16″ outside — a bigger box with flatter deep bass. Open in the calculator
Projects with this subwoofer
Boxes that users designed and published: plans, cut sheet and response graph.
Thiele/Small parameters
| Size | 10″ |
|---|---|
| Voice coils | dual 4 Ω |
| RMS power | 1,100 W |
| Fs | 37 Hz |
| Qts | 0.36 |
| Qes | 0.38 |
| Qms | 6.89 |
| Vas | 0.39 ft³ |
| Re (one coil) | 2.8 Ω |
|---|---|
| Sd | 49.7 in² |
| Xmax | 0.71″ |
| Vd | 35.2 in³ calc. |
| Mms | 245 g calc. |
| BL | 20.5 T·m calc. |
| EBP | 97 — sealed or ported calc. |
| Sensitivity, 1 W / 1 m | 83.7 dB calc. |
Mounting dimensions
| Cutout diameter | 9 5/16″ |
|---|---|
| Mounting depth | 6 15/16″ |
| Overall diameter | 10 1/4″ |
Where it fits in a vehicle
Spots from our vehicle guides where the cutout, mounting depth and recommended box fit. The spot sizes are approximate — measure your own vehicle.
- F-150 SuperCrew — under the rear seat sealed and ported box
- Ram Crew Cab — under the rear seat sealed and ported box
- Tacoma Double Cab — under the rear seat sealed box
- Bronco 4-door — behind the rear seat sealed and ported box
- Wrangler 4-door, hard top — behind the rear seat sealed and ported box
- Wrangler 4-door, soft top — behind the rear seat sealed and ported box
- Silverado / Sierra Crew Cab — under the rear seat sealed and ported box
- Spare tire well sealed box
- Polaris RZR / Ranger — under the seat sealed box
- Can-Am — under the seat sealed box
- FJ Cruiser — behind the rear seat sealed and ported box
- El Camino 1978–87 — behind the seat sealed and ported box
- Cherokee XJ — cargo area, spare moved out sealed and ported box
- Excursion — behind the third row sealed and ported box
- Mustang 2015–2023 coupe — trunk sealed and ported box
- Challenger / Charger — trunk sealed and ported box
- Tesla Model 3 — well under the trunk floor sealed box
- Club Car Precedent — under the rear seat sealed and ported box
“≈” means the value isn’t in the spec sheet and a typical value for the size is used; “calc.” means it’s calculated from the published parameters. Check the manufacturer’s spec sheet before you build.
Data sources
- zettaaudio.com.br/wp-content/uploads/2026/05/Manual-V-10-EVO-1100.pdf
- zettaaudio.com.br/suporte/manuais/
Other Zetta Audio 10″ models
- Zetta Audio L-10 300 10″ · 4 Ω
- Zetta Audio M-10 450 10″ · 4 Ω
- Zetta Audio S-10 700 10″ · 4 Ω
- Zetta Audio V-10 900 (4+4 Ohm) 10″ · dual 4 Ω
Similar 10″ subwoofers from other brands
Close in Fs, Qts and Vas — a box of similar volume will suit them.
- CT Sounds MESO-10 D2 0.55 ft³ sealed · 0.74 ft³ ported
- Sundown Audio SAv2-10 D2 0.53 ft³ sealed · 1.02 ft³ ported
- CT Sounds MESO-10 D4 0.55 ft³ sealed · 0.74 ft³ ported
- Sundown Audio Zv4-10 D1 0.79 ft³ sealed · 1.73 ft³ ported
- Sundown Audio SAv2-10 D4 0.53 ft³ sealed · 1.02 ft³ ported
- Fi Audio Q10 D1 0.49 ft³ sealed · 1.41 ft³ ported
All 10″ subwoofers in our database →
FAQ
What box does the Zetta Audio V-10 EVO 1100 need?
Recommended net volume: 0.51 ft³ sealed, 1.48 ft³ ported tuned to 38 Hz — for one sub in a sedan at 1,100 W. Fit the box to your space and amp in the free calculator, with plans and a cut sheet.
What are the Zetta Audio V-10 EVO 1100 Thiele/Small specs?
Fs 37 Hz, Qts 0.36, Vas 0.39 ft³, Xmax 0.71″, Sd 49.7 in².
What is the Zetta Audio V-10 EVO 1100 mounting depth?
Mounting depth is 6 15/16″, cutout diameter 9 5/16″. The inside depth of the box must exceed the mounting depth by at least 1″.
How much power does the Zetta Audio V-10 EVO 1100 handle and how do I wire it?
RMS power rating: 1,100 W. Dual 4 Ω voice coils: series gives 8 Ω, parallel gives 2 Ω at the amp. Wiring for several subs and amp power — in the wiring calculator.
Is the Zetta Audio V-10 EVO 1100 better sealed or ported?
EBP 97: both work — sealed 0.51 ft³ is tighter and smaller, ported 1.48 ft³ tuned to 38 Hz is deeper and louder.
What port does the Zetta Audio V-10 EVO 1100 need?
For the 1.48 ft³ ported box tuned to 38 Hz: slot 2 3/4 × 14 5/16″, 44 1/8″ long, area 39.5 in²; or a round port Ø7 1/16″, ≈ 44 1/8″ long. Port air speed at 1,100 W: 66 ft/s.
What box do two Zetta Audio V-10 EVO 1100 subs need?
Two subs need twice the volume: 1.02 ft³ sealed, or 2.97 ft³ ported at the same 38 Hz tuning with twice the port area. One shared chamber or one per sub — whatever fits your vehicle.