Triton Red Cross 10
10″ subwoofer · 4 Ω · 500 W RMS
Fs 37.6 HzQts 0.43Vas 0.53 ft³Xmax 0.51″
The published specs don’t add up:
- Sd of 42.4 in² is unusual for a 10″ (typically 43.4–62 in²).
Recommended box
For a sedan, one sub, 500 W. It’s the same math as the designer’s step-by-step mode, where you can fit the box to your space, vehicle and amp and get plans, a cut sheet and DXF.
Sealed
| Net volume | 0.39 ft³ (11 L) |
|---|---|
| Qtc | 0.66 |
| Fc | 58 Hz |
| F3 (−3 dB, no cabin gain) | 65 Hz |
| Example box (outside) | 12 3/16″ × 12 3/16″ × 8 1/8″ |
Ported
| Net volume | 0.81 ft³ (23 L) |
|---|---|
| Tuning (Fb) | 35 Hz |
| Port | round port Ø3″, 16 11/16″ long |
| Port velocity at 500 W | 163 ft/s |
| F3 (−3 dB, no cabin gain) | 33 Hz |
| Example box (outside) | 20 1/4″ × 15 3/4″ × 7 11/16″ |
Thiele/Small parameters
| Fs | 37.6 Hz |
|---|---|
| Qts | 0.43 |
| Qes | 0.45 |
| Qms | 9.92 |
| Vas | 0.53 ft³ |
| Re | 4 Ω |
| Sd | 42.4 in² |
| Xmax | 0.51″ |
| Vd | 21.7 in³ calc. |
| Mms | 127 g calc. |
| BL | 16.4 T·m calc. |
| EBP | 84 — sealed or ported calc. |
| Sensitivity, 1 W / 1 m | 84.5 dB calc. |
General
| Size | 10″ |
|---|---|
| Voice coils | 4 Ω |
| RMS power | 500 W |
Mounting dimensions
| Cutout diameter | ≈ 9 1/8″ |
|---|---|
| Mounting depth | ≈ 5 1/8″ |
| Magnet diameter | 5 1/4″ |
“≈” means the value isn’t in the spec sheet and a typical value for the size is used; “calc.” means it’s calculated from the published parameters. Check the manufacturer’s spec sheet before you build.
Data sources
Other Triton 10″ models
- Triton Sub Bass 10 10″ · 4 Ω