DC Audio Level 1 10 D2

10″ subwoofer · dual 2 Ω · 300 W RMS

Fs 37 HzQts 0.45Vas 0.60 ft³Xmax 0.75″

Recommended box

For a sedan, one sub, 300 W. It’s the same math as the designer’s step-by-step mode, where you can fit the box to your space, vehicle and amp and get plans, a cut sheet and DXF.

Sealed

Net volume0.46 ft³ (13 L)
Qtc0.68
Fc56 Hz
F3 (−3 dB, no cabin gain)62 Hz
Example box (outside)12 5/8″ × 12 5/8″ × 8 5/8″
Open sealed box in designer

Ported

Net volume0.95 ft³ (27 L)
Tuning (Fb)34 Hz
Portround port Ø3″, 14 7/8″ long
Port velocity at 300 W128 ft/s
F3 (−3 dB, no cabin gain)32 Hz
Example box (outside)20 7/16″ × 15 3/4″ × 8 7/16″
Open ported box in designer
2030405060801001502006066727884HzdB
Sealed Ported · SPL in dB at 1 W / 1 m, no cabin gain

Thiele/Small parameters

Fs37 Hz
Qts0.45
Qes0.52
Qms3.15
Vas0.60 ft³
Re (one coil)≈ 1.7 Ω
Sd50.2 in²
Xmax0.75″
Vd37.6 in³ calc.
Mms161 g calc.
BL11.1 T·m calc.
EBP71 — sealed or ported calc.
Sensitivity, 1 W / 1 m84.2 dB calc.

General

Size10″
Voice coilsdual 2 Ω
RMS power300 W

Mounting dimensions

Ø11″cutout Ø9 5/16″mounting depth 6″magnet Ø≈ 6 1/16″
Cutout diameter9 5/16″
Mounting depth6″
Overall diameter11″

“≈” means the value isn’t in the spec sheet and a typical value for the size is used; “calc.” means it’s calculated from the published parameters. Check the manufacturer’s spec sheet before you build.

Data sources

Other DC Audio 10″ models