Pride M.6 10 D1.7 (M6.10D17)

10″ subwoofer · dual 1.7 Ω · 600 W RMS

Fs 36.1 HzQts 0.52Vas 0.65 ft³Xmax 0.59″

The published specs don’t add up:

Xmax is rated at 50% BL drop — more than the usual linear Xmax; the excursion headroom will read too high.

Recommended box

For a sedan, one sub, 600 W. It’s the same math as the designer’s step-by-step mode, where you can fit the box to your space, vehicle and amp and get plans, a cut sheet and DXF.

Sealed

Net volume	0.49 ft³ (14 L)
Qtc	0.79
Fc	55 Hz
F3 (−3 dB, no cabin gain)	52 Hz
Example box (outside)	12 3/16″ × 12 3/16″ × 9 11/16″

Open sealed box in designer

Ported

Net volume	1.52 ft³ (43 L)
Tuning (Fb)	30 Hz
Port	slot 1 9/16 × 14 5/16″, 40 3/16″ long
Port velocity at 600 W	71 ft/s
F3 (−3 dB, no cabin gain)	27 Hz
Example box (outside)	31 1/2″ × 15 3/4″ × 10 5/8″

Open ported box in designer

Sealed Ported · SPL in dB at 1 W / 1 m, no cabin gain

Thiele/Small parameters

Fs	36.1 Hz
Qts	0.52
Qes	0.58
Qms	5.1
Vas	0.65 ft³
Re (one coil)	1.7 Ω
Sd	52.2 in²
Xmax	0.59″
Vd	30.8 in³ calc.
Mms	169 g calc.
BL	10.6 T·m calc.
EBP	62 — sealed or ported calc.
Sensitivity, 1 W / 1 m	83.8 dB calc.

General

Size	10″
Voice coils	dual 1.7 Ω
RMS power	600 W

Mounting dimensions

Cutout diameter	9 1/8″
Mounting depth	5 3/16″
Overall diameter	10 7/16″
Magnet diameter	5 1/2″

“≈” means the value isn’t in the spec sheet and a typical value for the size is used; “calc.” means it’s calculated from the published parameters. Check the manufacturer’s spec sheet before you build.

Data sources

pride.audio/product/m6-10/