Pride BB V.2 10 D2
10″ subwoofer · dual 2 Ω · 1,500 W RMS
Fs 37 HzQts 0.30Vas 0.42 ft³Xmax 1.02″
Recommended box
For a sedan, one sub, 1,500 W. It’s the same math as the designer’s step-by-step mode, where you can fit the box to your space, vehicle and amp and get plans, a cut sheet and DXF.
Sealed
| Net volume | 0.53 ft³ (15 L) |
|---|---|
| Qtc | 0.40 |
| Fc | 50 Hz |
| F3 (−3 dB, no cabin gain) | 106 Hz |
| Example box (outside) | 12 5/8″ × 12 5/8″ × 9 5/8″ |
Ported
| Net volume | 1.09 ft³ (31 L) |
|---|---|
| Tuning (Fb) | 27 Hz |
| Port | round port Ø2 1/2″, 14 7/8″ long |
| Port velocity at 1,500 W | 437 ft/s |
| F3 (−3 dB, no cabin gain) | 93 Hz |
| Example box (outside) | 20 7/8″ × 15 3/4″ × 9 1/16″ |
Thiele/Small parameters
| Fs | 37 Hz |
|---|---|
| Qts | 0.30 |
| Qes | 0.316 |
| Qms | 6 |
| Vas | 0.42 ft³ |
| Re (one coil) | 1.9 Ω |
| Sd | 57.4 in² |
| Xmax | 1.02″ |
| Vd | 58.7 in³ calc. |
| Mms | 299 g calc. |
| BL | 20.4 T·m calc. |
| EBP | 117 — suits ported calc. |
| Sensitivity, 1 W / 1 m | 84.8 dB calc. |
General
| Size | 10″ |
|---|---|
| Voice coils | dual 2 Ω |
| RMS power | 1,500 W |
Mounting dimensions
| Cutout diameter | 9 3/8″ |
|---|---|
| Mounting depth | 6 5/8″ |
Only Qts is published — Qms assumed to be 6 and Qes calculated (barely affects box design).
“≈” means the value isn’t in the spec sheet and a typical value for the size is used; “calc.” means it’s calculated from the published parameters. Check the manufacturer’s spec sheet before you build.
Data sources
Other Pride 10″ models
- Pride ECO 10 10″ · 4 Ω
- Pride LP 10 D2 10″ · dual 2 Ω
- Pride M.6 10 D1.7 (M6.10D17) 10″ · dual 1.7 Ω
- Pride M.9 10 (table: Re 0.4, SVC) 10″
- Pride M.12 10 (table: Re 0.4, SVC) 10″