Helix IK W10-SVC2 (1x2 Ohm)

10″ subwoofer · 2 Ω · 300 W RMS

Fs 32 HzQts 0.41Vas 0.88 ft³Xmax 0.31″

Recommended box

For a sedan, one sub, 300 W. It’s the same math as the designer’s step-by-step mode, where you can fit the box to your space, vehicle and amp and get plans, a cut sheet and DXF.

Sealed

Net volume0.46 ft³ (13 L)
Qtc0.71
Fc55 Hz
F3 (−3 dB, no cabin gain)58 Hz
Example box (outside)12 3/16″ × 12 3/16″ × 9 3/16″
Open sealed box in designer

Ported

Net volume1.06 ft³ (30 L)
Tuning (Fb)33 Hz
Port2 round ports Ø2 1/2″, 21 1/4″ long
Port velocity at 300 W95 ft/s
F3 (−3 dB, no cabin gain)31 Hz
Example box (outside)27″ × 15 3/4″ × 7 1/2″
Open ported box in designer
203040506080100150200606672788490HzdB
Sealed Ported · SPL in dB at 1 W / 1 m, no cabin gain

Thiele/Small parameters

Fs32 Hz
Qts0.41
Qes0.45
Qms5.09
Vas0.88 ft³
Re2 Ω
Sd51.6 in²
Xmax0.31″
Vd16.3 in³ calc.
Mms155 g calc.
BL11.8 T·m calc.
EBP71 — sealed or ported calc.
Sensitivity, 1 W / 1 m84.6 dB calc.

General

Size10″
Voice coils2 Ω
RMS power300 W

Mounting dimensions

Ø10 5/16″cutout Ø9 1/8″mounting depth 4 15/16″magnet Ø≈ 5 15/16″
Cutout diameter9 1/8″
Mounting depth4 15/16″
Overall diameter10 5/16″

“≈” means the value isn’t in the spec sheet and a typical value for the size is used; “calc.” means it’s calculated from the published parameters. Check the manufacturer’s spec sheet before you build.

Data sources

Other Helix 10″ models