Helix IK S10-SVC2 (1x2 Ohm)

10″ subwoofer · 2 Ω · 300 W RMS

Fs 37 HzQts 0.50Vas 0.92 ft³Xmax 0.24″

Recommended box

For a sedan, one sub, 300 W. It’s the same math as the designer’s step-by-step mode, where you can fit the box to your space, vehicle and amp and get plans, a cut sheet and DXF.

Sealed

Net volume0.60 ft³ (17 L)
Qtc0.80
Fc59 Hz
F3 (−3 dB, no cabin gain)56 Hz
Example box (outside)12 3/16″ × 12 3/16″ × 11 1/4″
Open sealed box in designer

Ported

Net volume1.94 ft³ (55 L)
Tuning (Fb)32 Hz
Portslot 1 9/16 × 14 5/16″, 26 7/16″ long
Port velocity at 300 W58 ft/s
F3 (−3 dB, no cabin gain)29 Hz
Example box (outside)31 1/2″ × 15 3/4″ × 11 3/8″
Open ported box in designer
203040506080100150200606672788490HzdB
Sealed Ported · SPL in dB at 1 W / 1 m, no cabin gain

Thiele/Small parameters

Fs37 Hz
Qts0.50
Qes0.54
Qms7.61
Vas0.92 ft³
Re≈ 1.7 Ω
Sd54.7 in²
Xmax0.24″
Vd12.9 in³ calc.
Mms126 g calc.
BL9.6 T·m calc.
EBP69 — sealed or ported calc.
Sensitivity, 1 W / 1 m85.9 dB calc.

General

Size10″
Voice coils2 Ω
RMS power300 W

Mounting dimensions

Ø10 5/16″cutout Ø9″mounting depth 3 3/8″magnet Ø≈ 5 7/8″
Cutout diameter9″
Mounting depth3 3/8″
Overall diameter10 5/16″

“≈” means the value isn’t in the spec sheet and a typical value for the size is used; “calc.” means it’s calculated from the published parameters. Check the manufacturer’s spec sheet before you build.

Data sources

Other Helix 10″ models