Gladen Gamma GS08-Slim (DVC 2 ohm)

8″ subwoofer · dual 2 Ω · 200 W RMS

Fs 43.4 HzQts 0.57Vas 0.22 ft³
The published specs don’t add up:

Recommended box

For a sedan, one sub, 200 W. It’s the same math as the designer’s step-by-step mode, where you can fit the box to your space, vehicle and amp and get plans, a cut sheet and DXF.

Sealed

Net volume0.28 ft³ (8 L)
Qtc0.76
Fc58 Hz
F3 (−3 dB, no cabin gain)57 Hz
Example box (outside)10 1/4″ × 10 1/4″ × 8 1/2″
Open sealed box in designer

Ported

Net volume0.64 ft³ (18 L)
Tuning (Fb)33 Hz
Portslot 1 15/16 × 14 5/16″, 104 9/16″ long
Port velocity at 200 W23 ft/s
F3 (−3 dB, no cabin gain)29 Hz
Example box (outside)31 1/2″ × 15 3/4″ × 11 7/8″

The volume and tuning are the recommendation, but the port doesn’t fit this example box. Size the box and port in the designer.

Open ported box in designer
2030405060801001502006066727884HzdB
Sealed Ported · SPL in dB at 1 W / 1 m, no cabin gain

Thiele/Small parameters

Fs43.4 Hz
Qts0.57
Qes0.622
Qms6.29
Vas0.22 ft³
Re (one coil)1.7 Ω
Sd32.7 in²
Xmax≈ 0.39″
Mms135 g calc.
BL10 T·m calc.
EBP70 — sealed or ported calc.
Sensitivity, 1 W / 1 m81.2 dB calc.

General

Size8″
Voice coilsdual 2 Ω
RMS power200 W

Mounting dimensions

Ø8 1/4″cutout Ø7 3/16″mounting depth 3″magnet Ø4 3/4″
Cutout diameter7 3/16″
Mounting depth3″
Overall diameter8 1/4″
Magnet diameter4 3/4″

“≈” means the value isn’t in the spec sheet and a typical value for the size is used; “calc.” means it’s calculated from the published parameters. Check the manufacturer’s spec sheet before you build.

Data sources

Other Gladen 8″ models