Edge EDS10D2-E7

10″ subwoofer · dual 2 Ω · 1,300 W RMS

Fs 35.4 HzQts 0.30Vas 0.54 ft³

Recommended box

For a sedan, one sub, 1,300 W. It’s the same math as the designer’s step-by-step mode, where you can fit the box to your space, vehicle and amp and get plans, a cut sheet and DXF.

Sealed

Net volume0.46 ft³ (13 L)
Qtc0.44
Fc52 Hz
F3 (−3 dB, no cabin gain)100 Hz
Example box (outside)12 3/16″ × 12 3/16″ × 9 3/16″
Open sealed box in designer

Ported

Net volume0.99 ft³ (28 L)
Tuning (Fb)29 Hz
Portround port Ø3″, 20 7/16″ long
Port velocity at 1,300 W279 ft/s
F3 (−3 dB, no cabin gain)84 Hz
Example box (outside)24″ × 15 3/4″ × 7 11/16″
Open ported box in designer
2030405060801001502006066727884HzdB
Sealed Ported · SPL in dB at 1 W / 1 m, no cabin gain

Thiele/Small parameters

Fs35.4 Hz
Qts0.30
Qes0.32
Qms3.85
Vas0.54 ft³
Re (one coil)1.95 Ω
Sd51.2 in²
Xmax≈ 0.39″
Mms204 g calc.
BL16.6 T·m calc.
EBP111 — suits ported calc.
Sensitivity, 1 W / 1 m85.3 dB calc.

General

Size10″
Voice coilsdual 2 Ω
RMS power1,300 W

Mounting dimensions

Ø≈ 10 5/16″cutout ≈ Ø9 1/8″mounting depth ≈ 5 1/8″magnet Ø≈ 5 15/16″
Cutout diameter≈ 9 1/8″
Mounting depth≈ 5 1/8″

“≈” means the value isn’t in the spec sheet and a typical value for the size is used; “calc.” means it’s calculated from the published parameters. Check the manufacturer’s spec sheet before you build.

Data sources