DD Audio VO-WN710 D2

10″ subwoofer · dual 2 Ω · 1,200 W RMS

Fs 40 HzQts 0.39Vas 0.36 ft³Xmax 0.47″

Recommended box

For a sedan, one sub, 1,200 W. It’s the same math as the designer’s step-by-step mode, where you can fit the box to your space, vehicle and amp and get plans, a cut sheet and DXF.

Sealed

Net volume0.49 ft³ (14 L)
Qtc0.51
Fc53 Hz
F3 (−3 dB, no cabin gain)82 Hz
Example box (outside)12 5/8″ × 12 5/8″ × 9 1/8″
Open sealed box in designer

Ported

Net volume1.02 ft³ (29 L)
Tuning (Fb)30 Hz
Portround port Ø3″, 18 3/16″ long
Port velocity at 1,200 W280 ft/s
F3 (−3 dB, no cabin gain)28 Hz
Example box (outside)26 1/16″ × 15 3/4″ × 7 5/16″
Open ported box in designer
2030405060801001502006066727884HzdB
Sealed Ported · SPL in dB at 1 W / 1 m, no cabin gain

Thiele/Small parameters

Fs40 Hz
Qts0.39
Qes0.42
Qms4.68
Vas0.36 ft³
Re (one coil)≈ 1.7 Ω
Sd≈ 52.7 in²
Xmax0.47″
EBP95 — sealed or ported calc.
Sensitivity, 1 W / 1 m84 dB calc.

General

Size10″
Voice coilsdual 2 Ω
RMS power1,200 W

Mounting dimensions

Ø≈ 10 9/16″cutout Ø9 3/8″mounting depth 4 13/16″magnet Ø4 5/16″
Cutout diameter9 3/8″
Mounting depth4 13/16″
Magnet diameter4 5/16″

“≈” means the value isn’t in the spec sheet and a typical value for the size is used; “calc.” means it’s calculated from the published parameters. Check the manufacturer’s spec sheet before you build.

Data sources

Other DD Audio 10″ models