DD Audio 610f D4

10″ subwoofer · dual 4 Ω · 1,000 W RMS

Fs 34 HzQts 0.42Vas 1.20 ft³Xmax 0.87″

Recommended box

For a sedan, one sub, 1,000 W. It’s the same math as the designer’s step-by-step mode, where you can fit the box to your space, vehicle and amp and get plans, a cut sheet and DXF.

Sealed

Net volume0.55 ft³ (15.5 L)
Qtc0.74
Fc61 Hz
F3 (−3 dB, no cabin gain)61 Hz
Example box (outside)12 5/8″ × 12 5/8″ × 9 7/8″
Open sealed box in designer

Ported

Net volume1.45 ft³ (41 L)
Tuning (Fb)34 Hz
Portround port Ø2 1/2″, 6 1/8″ long
Port velocity at 1,000 W406 ft/s
F3 (−3 dB, no cabin gain)32 Hz
Example box (outside)23 13/16″ × 15 3/4″ × 9 5/8″
Open ported box in designer
203040506080100150200606672788490HzdB
Sealed Ported · SPL in dB at 1 W / 1 m, no cabin gain

Thiele/Small parameters

Fs34 Hz
Qts0.42
Qes0.454
Qms5.05
Vas1.20 ft³
Re (one coil)≈ 3.4 Ω
Sd≈ 52.7 in²
Xmax0.87″
EBP75 — sealed or ported calc.
Sensitivity, 1 W / 1 m86.7 dB calc.

General

Size10″
Voice coilsdual 4 Ω
RMS power1,000 W

Mounting dimensions

Ø10 5/8″cutout Ø9 7/16″mounting depth 7 1/4″magnet Ø7″
Cutout diameter9 7/16″
Mounting depth7 1/4″
Overall diameter10 5/8″
Magnet diameter7″

“≈” means the value isn’t in the spec sheet and a typical value for the size is used; “calc.” means it’s calculated from the published parameters. Check the manufacturer’s spec sheet before you build.

Data sources

Other DD Audio 10″ models