Audio System HX 10 SQ

10″ subwoofer · 4 Ω · 350 W RMS

Fs 27.6 HzQts 0.39Vas 1.11 ft³Xmax 0.43″

Recommended box

For a sedan, one sub, 350 W. It’s the same math as the designer’s step-by-step mode, where you can fit the box to your space, vehicle and amp and get plans, a cut sheet and DXF.

Sealed

Net volume0.48 ft³ (13.5 L)
Qtc0.71
Fc50 Hz
F3 (−3 dB, no cabin gain)53 Hz
Example box (outside)12 5/8″ × 12 5/8″ × 8 7/8″
Open sealed box in designer

Ported

Net volume1.13 ft³ (32 L)
Tuning (Fb)30 Hz
Portround port Ø3″, 16 5/16″ long
Port velocity at 350 W142 ft/s
F3 (−3 dB, no cabin gain)29 Hz
Example box (outside)22 3/8″ × 15 3/4″ × 8 7/8″
Open ported box in designer
2030405060801001502006066727884HzdB
Sealed Ported · SPL in dB at 1 W / 1 m, no cabin gain

Thiele/Small parameters

Fs27.6 Hz
Qts0.39
Qes0.41
Qms7.81
Vas1.11 ft³
Re3.2 Ω
Sd50.7 in²
Xmax0.43″
Vd21.9 in³ calc.
Mms160 g calc.
BL14.7 T·m calc.
EBP67 — sealed or ported calc.
Sensitivity, 1 W / 1 m84.1 dB calc.

General

Size10″
Voice coils4 Ω
RMS power350 W

Mounting dimensions

Ø10 3/16″cutout Ø9 3/8″mounting depth 6 3/8″magnet Ø≈ 6 1/16″
Cutout diameter9 3/8″
Mounting depth6 3/8″
Overall diameter10 3/16″

“≈” means the value isn’t in the spec sheet and a typical value for the size is used; “calc.” means it’s calculated from the published parameters. Check the manufacturer’s spec sheet before you build.

Data sources

Other Audio System 10″ models