Audio System H10 EVO

10″ subwoofer · dual 2 Ω · 2,000 W RMS

Fs 38 HzQts 0.37Vas 0.49 ft³Xmax 0.87″

Recommended box

For a sedan, one sub, 2,000 W. It’s the same math as the designer’s step-by-step mode, where you can fit the box to your space, vehicle and amp and get plans, a cut sheet and DXF.

Sealed

Net volume0.58 ft³ (16.5 L)
Qtc0.50
Fc51 Hz
F3 (−3 dB, no cabin gain)82 Hz
Example box (outside)12 5/8″ × 12 5/8″ × 10 3/8″
Open sealed box in designer

Ported

Net volume1.09 ft³ (31 L)
Tuning (Fb)30 Hz
Portround port Ø3″, 16 7/8″ long
Port velocity at 2,000 W365 ft/s
F3 (−3 dB, no cabin gain)29 Hz
Example box (outside)18 5/16″ × 15 3/4″ × 10 1/4″
Open ported box in designer
2030405060801001502006066727884HzdB
Sealed Ported · SPL in dB at 1 W / 1 m, no cabin gain

Thiele/Small parameters

Fs38 Hz
Qts0.37
Qes0.405
Qms3.93
Vas0.49 ft³
Re (one coil)1.9 Ω
Sd56.8 in²
Xmax0.87″
Vd49.2 in³ calc.
Mms242 g calc.
BL16.5 T·m calc.
EBP94 — sealed or ported calc.
Sensitivity, 1 W / 1 m84.7 dB calc.

General

Size10″
Voice coilsdual 2 Ω
RMS power2,000 W

Mounting dimensions

Ø10 7/16″cutout Ø9 7/16″mounting depth 7 3/4″magnet Ø≈ 6 1/8″
Cutout diameter9 7/16″
Mounting depth7 3/4″
Overall diameter10 7/16″

“≈” means the value isn’t in the spec sheet and a typical value for the size is used; “calc.” means it’s calculated from the published parameters. Check the manufacturer’s spec sheet before you build.

Data sources

Other Audio System 10″ models