Treo RSX 10.22
10″ subwoofer · dual 2 Ω · 350 W RMS
Fs 34.5 HzQts 0.53Vas 0.83 ft³Xmax 1.14″
The published specs don’t add up:
- The published Xmax 1.14″ looks like max (mechanical) excursion, not linear: the excursion-limited power will read too high.
Recommended box
For a sedan, one sub, 350 W. It’s the same math as the designer’s step-by-step mode, where you can fit the box to your space, vehicle and amp and get plans, a cut sheet and DXF.
Sealed
| Net volume | 0.64 ft³ (18 L) |
|---|---|
| Qtc | 0.80 |
| Fc | 52 Hz |
| F3 (−3 dB, no cabin gain) | 49 Hz |
| Example box (outside) | 12 3/16″ × 12 3/16″ × 11 13/16″ |
Ported
| Net volume | 1.87 ft³ (53 L) |
|---|---|
| Tuning (Fb) | 29 Hz |
| Port | slot 1 9/16 × 14 5/16″, 34 3/8″ long |
| Port velocity at 350 W | 58 ft/s |
| F3 (−3 dB, no cabin gain) | 26 Hz |
| Example box (outside) | 31 1/2″ × 15 3/4″ × 11 11/16″ |
Thiele/Small parameters
| Fs | 34.5 Hz |
|---|---|
| Qts | 0.53 |
| Qes | 0.614 |
| Qms | 3.67 |
| Vas | 0.83 ft³ |
| Re (one coil) | 1.7 Ω |
| Sd | 48.7 in² |
| Xmax | 1.14″ |
| Vd | 55.6 in³ calc. |
| Mms | 128 g calc. |
| BL | 8.7 T·m calc. |
| EBP | 56 — sealed or ported calc. |
| Sensitivity, 1 W / 1 m | 83.9 dB calc. |
General
| Size | 10″ |
|---|---|
| Voice coils | dual 2 Ω |
| RMS power | 350 W |
Mounting dimensions
| Cutout diameter | 9 1/8″ |
|---|---|
| Mounting depth | 5 1/8″ |
| Overall diameter | 10 3/16″ |
Judging by its value, the published Re is for both coils in series — converted to per coil.
“≈” means the value isn’t in the spec sheet and a typical value for the size is used; “calc.” means it’s calculated from the published parameters. Check the manufacturer’s spec sheet before you build.
Data sources
Other Treo 10″ models
- Treo RSX 10.44 10″ · dual 4 Ω
- Treo SSp 10.11 10″ · dual 1 Ω
- Treo TSi10.4 10″ · 4 Ω