Rockville W10K6D2 V2

10″ subwoofer · dual 2 Ω · 500 W RMS

Fs 36.7 HzQts 0.52Vas 0.54 ft³Xmax 0.79″

Recommended box

For a sedan, one sub, 500 W. It’s the same math as the designer’s step-by-step mode, where you can fit the box to your space, vehicle and amp and get plans, a cut sheet and DXF.

Sealed

Net volume0.46 ft³ (13 L)
Qtc0.76
Fc54 Hz
F3 (−3 dB, no cabin gain)53 Hz
Example box (outside)12 5/8″ × 12 5/8″ × 8 5/8″
Open sealed box in designer

Ported

Net volume1.20 ft³ (34 L)
Tuning (Fb)31 Hz
Port2 round ports Ø2 1/2″, 21 1/4″ long
Port velocity at 500 W131 ft/s
F3 (−3 dB, no cabin gain)28 Hz
Example box (outside)28 15/16″ × 15 3/4″ × 7 11/16″
Open ported box in designer
2030405060801001502006066727884HzdB
Sealed Ported · SPL in dB at 1 W / 1 m, no cabin gain

Thiele/Small parameters

Fs36.7 Hz
Qts0.52
Qes0.57
Qms5.44
Vas0.54 ft³
Re (one coil)2 Ω
Sd50.9 in²
Xmax0.79″
Vd40.1 in³ calc.
Mms189 g calc.
BL12.4 T·m calc.
EBP64 — sealed or ported calc.
Sensitivity, 1 W / 1 m83.2 dB calc.

General

Size10″
Voice coilsdual 2 Ω
RMS power500 W

Mounting dimensions

Ø≈ 10 9/16″cutout Ø9 7/16″mounting depth 5 1/4″magnet Ø6 1/8″
Cutout diameter9 7/16″
Mounting depth5 1/4″
Magnet diameter6 1/8″

Cone area (Sd) calculated from Fs, Vas and Mms: 50.9 in².

“≈” means the value isn’t in the spec sheet and a typical value for the size is used; “calc.” means it’s calculated from the published parameters. Check the manufacturer’s spec sheet before you build.

Data sources

Other Rockville 10″ models