Rockford Fosgate Punch Power RFR-1410 (1996)

10″ subwoofer · 4 Ω · 300 W RMS

Fs 28 HzQts 0.28Vas 2.08 ft³Xmax 0.30″

Recommended box

For a sedan, one sub, 300 W. It’s the same math as the designer’s step-by-step mode, where you can fit the box to your space, vehicle and amp and get plans, a cut sheet and DXF.

Sealed

Net volume0.49 ft³ (14 L)
Qtc0.64
Fc64 Hz
F3 (−3 dB, no cabin gain)75 Hz
Example box (outside)12 5/8″ × 12 5/8″ × 9 1/8″
Open sealed box in designer

Ported

Net volume1.02 ft³ (29 L)
Tuning (Fb)37 Hz
Portslot 1 9/16 × 14 5/16″, 39 1/8″ long
Port velocity at 300 W39 ft/s
F3 (−3 dB, no cabin gain)39 Hz
Example box (outside)31 1/2″ × 15 3/4″ × 8 9/16″
Open ported box in designer
203040506080100150200606672788490HzdB
Sealed Ported · SPL in dB at 1 W / 1 m, no cabin gain

Thiele/Small parameters

Fs28 Hz
Qts0.28
Qes0.32
Qms2.38
Vas2.08 ft³
Re3.7 Ω
Sd54.3 in²
Xmax0.30″
Vd16.4 in³ calc.
Mms95 g calc.
BL13.9 T·m calc.
EBP88 — sealed or ported calc.
Sensitivity, 1 W / 1 m88.1 dB calc.

General

Size10″
Voice coils4 Ω
RMS power300 W

Mounting dimensions

Ø10 1/4″cutout Ø9 1/4″mounting depth 4 7/8″magnet Ø≈ 6″
Cutout diameter9 1/4″
Mounting depth4 7/8″
Overall diameter10 1/4″

“≈” means the value isn’t in the spec sheet and a typical value for the size is used; “calc.” means it’s calculated from the published parameters. Check the manufacturer’s spec sheet before you build.

Data sources

Other Rockford Fosgate 10″ models