Resilient Sounds Gold 10 D4
10″ subwoofer · dual 4 Ω · 1,000 W RMS
Fs 38.9 HzQts 0.44Vas 0.35 ft³Xmax 0.98″
Recommended box
For a sedan, one sub, 1,000 W. It’s the same math as the designer’s step-by-step mode, where you can fit the box to your space, vehicle and amp and get plans, a cut sheet and DXF.
Sealed
| Net volume | 0.57 ft³ (16 L) |
|---|---|
| Qtc | 0.56 |
| Fc | 49 Hz |
| F3 (−3 dB, no cabin gain) | 67 Hz |
| Example box (outside) | 12 5/8″ × 12 5/8″ × 10 1/8″ |
Ported
| Net volume | 0.95 ft³ (27 L) |
|---|---|
| Tuning (Fb) | 29 Hz |
| Port | round port Ø2 1/2″, 14 3/4″ long |
| Port velocity at 1,000 W | 339 ft/s |
| F3 (−3 dB, no cabin gain) | 27 Hz |
| Example box (outside) | 16 5/16″ × 15 3/4″ × 10 1/16″ |
Thiele/Small parameters
| Fs | 38.9 Hz |
|---|---|
| Qts | 0.44 |
| Qes | 0.48 |
| Qms | 5.27 |
| Vas | 0.35 ft³ |
| Re (one coil) | 4 Ω |
| Sd | 50.7 in² |
| Xmax | 0.98″ |
| Vd | 49.9 in³ calc. |
| Mms | 257 g calc. |
| BL | 22.9 T·m calc. |
| EBP | 81 — sealed or ported calc. |
| Sensitivity, 1 W / 1 m | 82.8 dB calc. |
General
| Size | 10″ |
|---|---|
| Voice coils | dual 4 Ω |
| RMS power | 1,000 W |
Mounting dimensions
| Cutout diameter | 9 5/16″ |
|---|---|
| Mounting depth | 7 1/2″ |
Cone area (Sd) calculated from Fs, Vas and Mms: 50.7 in².
Judging by its value, the published Re is for both coils in series — converted to per coil.
“≈” means the value isn’t in the spec sheet and a typical value for the size is used; “calc.” means it’s calculated from the published parameters. Check the manufacturer’s spec sheet before you build.
Data sources
Other Resilient Sounds 10″ models
- Resilient Sounds RS 10 D4 10″ · dual 4 Ω
- Resilient Sounds RS 10 V2 D4 10″ · dual 4 Ω