JBL Stage 1010

10″ subwoofer · 4 Ω · 225 W RMS

Fs 37.1 HzQts 0.43Vas 1.47 ft³Xmax 0.24″

Recommended box

For a sedan, one sub, 225 W. It’s the same math as the designer’s step-by-step mode, where you can fit the box to your space, vehicle and amp and get plans, a cut sheet and DXF.

Sealed

Net volume0.60 ft³ (17 L)
Qtc0.79
Fc69 Hz
F3 (−3 dB, no cabin gain)66 Hz
Example box (outside)12 3/16″ × 12 3/16″ × 11 1/4″
Open sealed box in designer

Ported

Net volume1.91 ft³ (54 L)
Tuning (Fb)37 Hz
Portslot 1 9/16 × 14 5/16″, 19 3/16″ long
Port velocity at 225 W51 ft/s
F3 (−3 dB, no cabin gain)35 Hz
Example box (outside)31 1/2″ × 15 3/4″ × 10 11/16″
Open ported box in designer
203040506080100150200606672788490HzdB
Sealed Ported · SPL in dB at 1 W / 1 m, no cabin gain

Thiele/Small parameters

Fs37.1 Hz
Qts0.43
Qes0.46
Qms5.92
Vas1.47 ft³
Re3.6 Ω
Sd56.8 in²
Xmax0.24″
Vd13.9 in³ calc.
Mms84 g calc.
BL12.4 T·m calc.
EBP81 — sealed or ported calc.
Sensitivity, 1 W / 1 m88.6 dB calc.

General

Size10″
Voice coils4 Ω
RMS power225 W

Mounting dimensions

Ø10″cutout Ø9 1/8″mounting depth 4 7/16″magnet Ø≈ 5 15/16″
Cutout diameter9 1/8″
Mounting depth4 7/16″
Overall diameter10″

“≈” means the value isn’t in the spec sheet and a typical value for the size is used; “calc.” means it’s calculated from the published parameters. Check the manufacturer’s spec sheet before you build.

Data sources

Other JBL 10″ models