Ground Zero GZIW 165X-II (4 Ohm)

6.5″ subwoofer · 4 Ω · 150 W RMS

Fs 41.5 HzQts 0.45Vas 0.30 ft³Xmax 0.31″

Recommended box

For a sedan, one sub, 150 W. It’s the same math as the designer’s step-by-step mode, where you can fit the box to your space, vehicle and amp and get plans, a cut sheet and DXF.

Sealed

Net volume0.18 ft³ (5 L)
Qtc0.74
Fc68 Hz
F3 (−3 dB, no cabin gain)69 Hz
Example box (outside)9 1/16″ × 9 1/16″ × 7 3/16″
Open sealed box in designer

Ported

Net volume0.46 ft³ (13 L)
Tuning (Fb)39 Hz
Portslot 1 15/16 × 14 5/16″, 103 5/8″ long
Port velocity at 150 W18 ft/s
F3 (−3 dB, no cabin gain)36 Hz
Example box (outside)31 1/2″ × 15 3/4″ × 11″

The volume and tuning are the recommendation, but the port doesn’t fit this example box. Size the box and port in the designer.

Open ported box in designer
2030405060801001502006066727884HzdB
Sealed Ported · SPL in dB at 1 W / 1 m, no cabin gain

Thiele/Small parameters

Fs41.5 Hz
Qts0.45
Qes0.47
Qms9.92
Vas0.30 ft³
Re3.68 Ω
Sd19.9 in²
Xmax0.31″
Vd6.3 in³ calc.
Mms40 g calc.
BL9 T·m calc.
EBP88 — sealed or ported calc.
Sensitivity, 1 W / 1 m83.2 dB calc.

General

Size6.5″
Voice coils4 Ω
RMS power150 W

Mounting dimensions

Ø6 5/8″cutout Ø5 13/16″mounting depth 3 1/8″magnet Ø≈ 3 3/4″
Cutout diameter5 13/16″
Mounting depth3 1/8″
Overall diameter6 5/8″

Cone area (Sd) calculated from Fs, Vas and Mms: 19.9 in².

“≈” means the value isn’t in the spec sheet and a typical value for the size is used; “calc.” means it’s calculated from the published parameters. Check the manufacturer’s spec sheet before you build.

Data sources

Other Ground Zero 6.5″ models