Brax Matrix ML10 (1x4 Ohm)

10″ subwoofer · 4 Ω · 600 W RMS

Fs 35 HzQts 0.46Vas 1.41 ft³Xmax 0.49″

Recommended box

For a sedan, one sub, 600 W. It’s the same math as the designer’s step-by-step mode, where you can fit the box to your space, vehicle and amp and get plans, a cut sheet and DXF.

Sealed

Net volume0.71 ft³ (20 L)
Qtc0.80
Fc61 Hz
F3 (−3 dB, no cabin gain)58 Hz
Example box (outside)12 5/8″ × 12 5/8″ × 12 1/16″
Open sealed box in designer

Ported

Net volume2.08 ft³ (59 L)
Tuning (Fb)34 Hz
Portslot 2 3/16 × 14 5/16″, 29 13/16″ long
Port velocity at 600 W62 ft/s
F3 (−3 dB, no cabin gain)31 Hz
Example box (outside)31 1/2″ × 15 3/4″ × 12 3/4″
Open ported box in designer
203040506080100150200606672788490HzdB
Sealed Ported · SPL in dB at 1 W / 1 m, no cabin gain

Thiele/Small parameters

Fs35 Hz
Qts0.46
Qes0.49
Qms8.1
Vas1.41 ft³
Re3.4 Ω
Sd53.6 in²
Xmax0.49″
Vd26.4 in³ calc.
Mms88 g calc.
BL11.6 T·m calc.
EBP71 — sealed or ported calc.
Sensitivity, 1 W / 1 m87.4 dB calc.

General

Size10″
Voice coils4 Ω
RMS power600 W

Mounting dimensions

Ø10 13/16″cutout Ø9 1/4″mounting depth 4 1/2″magnet Ø≈ 6″
Cutout diameter9 1/4″
Mounting depth4 1/2″
Overall diameter10 13/16″

“≈” means the value isn’t in the spec sheet and a typical value for the size is used; “calc.” means it’s calculated from the published parameters. Check the manufacturer’s spec sheet before you build.

Data sources

Other Brax 10″ models