Audioque SDC2.510 D4

10″ subwoofer · dual 4 Ω · 600 W RMS

Fs 33 HzQts 0.41Vas 0.53 ft³

Recommended box

For a sedan, one sub, 600 W. It’s the same math as the designer’s step-by-step mode, where you can fit the box to your space, vehicle and amp and get plans, a cut sheet and DXF.

Sealed

Net volume0.49 ft³ (14 L)
Qtc0.60
Fc47 Hz
F3 (−3 dB, no cabin gain)60 Hz
Example box (outside)12 3/16″ × 12 3/16″ × 9 11/16″
Open sealed box in designer

Ported

Net volume1.02 ft³ (29 L)
Tuning (Fb)29 Hz
Portround port Ø2 1/2″, 13 5/8″ long
Port velocity at 600 W260 ft/s
F3 (−3 dB, no cabin gain)27 Hz
Example box (outside)20 11/16″ × 15 3/4″ × 8 11/16″
Open ported box in designer
2030405060801001502006066727884HzdB
Sealed Ported · SPL in dB at 1 W / 1 m, no cabin gain

Thiele/Small parameters

Fs33 Hz
Qts0.41
Qes0.465
Qms3.76
Vas0.53 ft³
Re (one coil)≈ 3.4 Ω
Sd≈ 52.7 in²
Xmax≈ 0.39″
EBP71 — sealed or ported calc.
Sensitivity, 1 W / 1 m82.6 dB calc.

General

Size10″
Voice coilsdual 4 Ω
RMS power600 W

Mounting dimensions

Ø≈ 10 5/16″cutout ≈ Ø9 1/8″mounting depth 6 1/4″magnet Ø≈ 5 15/16″
Cutout diameter≈ 9 1/8″
Mounting depth6 1/4″

“≈” means the value isn’t in the spec sheet and a typical value for the size is used; “calc.” means it’s calculated from the published parameters. Check the manufacturer’s spec sheet before you build.

Data sources

Other Audioque 10″ models