ACV SW PRO101D
10″ subwoofer · dual 1 Ω · 500 W RMS
Fs 30 HzQts 0.27Vas 0.71 ft³Xmax 0.75″
The published specs don’t add up:
- The spec sheet's Qts 0.3 doesn't match its Qes and Qms (they give 0.27).
- Fs, Vas and Sd don't match the moving mass of 133 g (they give 230 g) — one of the spec sheet values is probably wrong.
Recommended box
For a sedan, one sub, 500 W. It’s the same math as the designer’s step-by-step mode, where you can fit the box to your space, vehicle and amp and get plans, a cut sheet and DXF.
Sealed
| Net volume | 0.49 ft³ (14 L) |
|---|---|
| Qtc | 0.43 |
| Fc | 47 Hz |
| F3 (−3 dB, no cabin gain) | 93 Hz |
| Example box (outside) | 12 3/16″ × 12 3/16″ × 9 11/16″ |
Ported
| Net volume | 1.02 ft³ (29 L) |
|---|---|
| Tuning (Fb) | 27 Hz |
| Port | round port Ø2 1/2″, 16″ long |
| Port velocity at 500 W | 236 ft/s |
| F3 (−3 dB, no cabin gain) | 77 Hz |
| Example box (outside) | 22 9/16″ × 15 3/4″ × 8 1/16″ |
Thiele/Small parameters
| Fs | 30 Hz |
|---|---|
| Qts | 0.27 |
| Qes | 0.29 |
| Qms | 4.8 |
| Vas | 0.71 ft³ |
| Re (one coil) | 1 Ω |
| Sd | ≈ 52.7 in² |
| Xmax | 0.75″ |
| EBP | 103 — suits ported calc. |
| Sensitivity, 1 W / 1 m | 84.7 dB calc. |
General
| Size | 10″ |
|---|---|
| Voice coils | dual 1 Ω |
| RMS power | 500 W |
Mounting dimensions
| Cutout diameter | 9 1/16″ |
|---|---|
| Mounting depth | 5 1/2″ |
| Overall diameter | 10 3/8″ |
“≈” means the value isn’t in the spec sheet and a typical value for the size is used; “calc.” means it’s calculated from the published parameters. Check the manufacturer’s spec sheet before you build.
Data sources
- acv-auto.com/catalog/35757/467828/
- acv-auto.com/upload/iblock/ab5/Rukovodstvo_polzovatelya_ACV_SW_SWF.pdf
Other ACV 10″ models
- ACV SW PRO102D 10″ · dual 2 Ω