Soundstream R3.10
10″ subwoofer · dual 2 Ω · 1,000 W RMS
Fs 34.6 HzQts 1.07Vas 1.18 ft³
The published specs don’t add up:
- Fs, Vas and Sd don't match the moving mass of 231.3417 g (they give 104 g) — one of the spec sheet values is probably wrong.
Recommended box
For a sedan, one sub, 1,000 W. It’s the same math as the designer’s step-by-step mode, where you can fit the box to your space, vehicle and amp and get plans, a cut sheet and DXF.
Sealed
| Net volume | 1.20 ft³ (34 L) |
|---|---|
| Qtc | 1.51 |
| Fc | 49 Hz |
| F3 (−3 dB, no cabin gain) | 35 Hz |
| Example box (outside) | 12 5/8″ × 12 5/8″ × 18 7/8″ |
Ported
| Net volume | 2.05 ft³ (58 L) |
|---|---|
| Tuning (Fb) | 38 Hz |
| Port | slot 2 3/8 × 14 5/16″, 25 13/16″ long |
| Port velocity at 1,000 W | 63 ft/s |
| F3 (−3 dB, no cabin gain) | 30 Hz |
| Example box (outside) | 31 1/2″ × 15 3/4″ × 12 3/8″ |
Thiele/Small parameters
| Fs | 34.6 Hz |
|---|---|
| Qts | 1.07 |
| Qes | 1.253 |
| Qms | 7.34 |
| Vas | 1.18 ft³ |
| Re (one coil) | 2.18 Ω |
| Sd | ≈ 52.7 in² |
| Xmax | ≈ 0.39″ |
| EBP | 28 — suits sealed calc. |
| Sensitivity, 1 W / 1 m | 82.4 dB calc. |
General
| Size | 10″ |
|---|---|
| Voice coils | dual 2 Ω |
| RMS power | 1,000 W |
Mounting dimensions
| Cutout diameter | 9 5/8″ |
|---|---|
| Mounting depth | 6″ |
“≈” means the value isn’t in the spec sheet and a typical value for the size is used; “calc.” means it’s calculated from the published parameters. Check the manufacturer’s spec sheet before you build.
Data sources
Other Soundstream 10″ models
- Soundstream T5.102 10″ · dual 2 Ω
- Soundstream T5.104 10″ · dual 4 Ω