Pyle PLW10BL

10″ subwoofer · 4 Ω

Fs 35.9 HzQts 0.72Vas 1.93 ft³

Recommended box

For a sedan, one sub, 300 W. It’s the same math as the designer’s step-by-step mode, where you can fit the box to your space, vehicle and amp and get plans, a cut sheet and DXF.

Sealed

Net volume1.20 ft³ (34 L)
Qtc1.17
Fc58 Hz
F3 (−3 dB, no cabin gain)45 Hz
Example box (outside)13″ × 13″ × 17 3/4″
Open sealed box in designer

Ported

Net volume2.05 ft³ (58 L)
Tuning (Fb)42 Hz
Portslot 1 9/16 × 14 5/16″, 12 3/4″ long
Port velocity at 300 W54 ft/s
F3 (−3 dB, no cabin gain)37 Hz
Example box (outside)31 1/2″ × 15 3/4″ × 10 3/4″
Open ported box in designer
203040506080100150200667278849096HzdB
Sealed Ported · SPL in dB at 1 W / 1 m, no cabin gain

Thiele/Small parameters

Fs35.9 Hz
Qts0.72
Qes0.83
Qms5.72
Vas1.93 ft³
Re≈ 3.4 Ω
Sd≈ 52.7 in²
Xmax≈ 0.39″
EBP43 — suits sealed calc.
Sensitivity, 1 W / 1 m86.8 dB calc.

General

Size10″
Voice coils4 Ω
RMS power—

Mounting dimensions

Ø10 3/16″cutout Ø9 11/16″mounting depth 4 7/16″magnet Ø≈ 6 5/16″
Cutout diameter9 11/16″
Mounting depth4 7/16″
Overall diameter10 3/16″

“≈” means the value isn’t in the spec sheet and a typical value for the size is used; “calc.” means it’s calculated from the published parameters. Check the manufacturer’s spec sheet before you build.

Data sources

Other Pyle 10″ models