Hinor HSW10 Carbono

10″ subwoofer · 4 Ω · 180 W RMS

Fs 57.1 HzQts 0.98Vas 1.15 ft³Xmax 0.16″

Recommended box

For a sedan, one sub, 180 W. It’s the same math as the designer’s step-by-step mode, where you can fit the box to your space, vehicle and amp and get plans, a cut sheet and DXF.

Sealed

Net volume1.41 ft³ (40 L)
Qtc1.32
Fc77 Hz
F3 (−3 dB, no cabin gain)57 Hz
Example box (outside)12 3/16″ × 12 3/16″ × 23 5/16″
Open sealed box in designer

Ported

Net volume2.40 ft³ (68 L)
Tuning (Fb)50 Hz
Portslot 1 9/16 × 14 5/16″, 6 1/8″ long
Port velocity at 180 W53 ft/s
F3 (−3 dB, no cabin gain)41 Hz
Example box (outside)31 1/2″ × 15 3/4″ × 11 11/16″
Open ported box in designer
2030405060801001502007278849096102HzdB
Sealed Ported · SPL in dB at 1 W / 1 m, no cabin gain

Thiele/Small parameters

Fs57.1 Hz
Qts0.98
Qes1.22
Qms4.92
Vas1.15 ft³
Re3.9 Ω
Sd61.7 in²
Xmax0.16″
Vd9.7 in³ calc.
Mms53 g calc.
BL7.8 T·m calc.
EBP47 — suits sealed calc.
Sensitivity, 1 W / 1 m89 dB calc.

General

Size10″
Voice coils4 Ω
RMS power180 W

Mounting dimensions

Ø≈ 10 5/16″cutout ≈ Ø9 1/8″mounting depth ≈ 5 1/8″magnet Ø≈ 5 15/16″
Cutout diameter≈ 9 1/8″
Mounting depth≈ 5 1/8″

“≈” means the value isn’t in the spec sheet and a typical value for the size is used; “calc.” means it’s calculated from the published parameters. Check the manufacturer’s spec sheet before you build.

Data sources