Audison Voce AV 10 (1st gen, SVC 4 ohm)
10″ subwoofer · 4 Ω · 400 W RMS
Fs 41 HzQts 0.54Vas 1.08 ft³Xmax 0.55″
Recommended box
For a sedan, one sub, 400 W. It’s the same math as the designer’s step-by-step mode, where you can fit the box to your space, vehicle and amp and get plans, a cut sheet and DXF.
Sealed
| Net volume | 0.92 ft³ (26 L) |
|---|---|
| Qtc | 0.80 |
| Fc | 61 Hz |
| F3 (−3 dB, no cabin gain) | 57 Hz |
| Example box (outside) | 12 3/16″ × 12 3/16″ × 16″ |
Ported
| Net volume | 2.05 ft³ (58 L) |
|---|---|
| Tuning (Fb) | 37 Hz |
| Port | slot 1 3/4 × 14 5/16″, 20 1/16″ long |
| Port velocity at 400 W | 60 ft/s |
| F3 (−3 dB, no cabin gain) | 33 Hz |
| Example box (outside) | 31 1/2″ × 15 3/4″ × 11 7/16″ |
Thiele/Small parameters
| Fs | 41 Hz |
|---|---|
| Qts | 0.54 |
| Qes | 0.66 |
| Qms | 2.95 |
| Vas | 1.08 ft³ |
| Re | 3.7 Ω |
| Sd | 52.6 in² |
| Xmax | 0.55″ |
| Vd | 29 in³ calc. |
| Mms | 80 g calc. |
| BL | 10.7 T·m calc. |
| EBP | 62 — sealed or ported calc. |
| Sensitivity, 1 W / 1 m | 87.1 dB calc. |
General
| Size | 10″ |
|---|---|
| Voice coils | 4 Ω |
| RMS power | 400 W |
Mounting dimensions
| Cutout diameter | 9 1/16″ |
|---|---|
| Mounting depth | 5 7/16″ |
| Overall diameter | 10 9/16″ |
Cone area (Sd) calculated from Fs, Vas and Mms: 52.6 in².
“≈” means the value isn’t in the spec sheet and a typical value for the size is used; “calc.” means it’s calculated from the published parameters. Check the manufacturer’s spec sheet before you build.
Data sources
Other Audison 10″ models
- Audison Prima APS 10 D (DVC 4+4 ohm) 10″ · dual 4 Ω
- Audison Prima APS 10 S4S (SVC 4 ohm, shallow) 10″ · 4 Ω
- Audison Voce II AV 10 D2 II (DVC 2+2 ohm) 10″ · dual 2 Ω
- Audison Voce II AV 10 D4 II (DVC 4+4 ohm) 10″ · dual 4 Ω