Swat REV-12 v.2

12″ subwoofer · dual 2 Ω · 550 W RMS

Fs 35.1 HzQts 0.53Vas 1.64 ft³

Recommended box

For a sedan, one sub, 550 W. It’s the same math as the designer’s step-by-step mode, where you can fit the box to your space, vehicle and amp and get plans, a cut sheet and DXF.

Sealed

Net volume1.27 ft³ (36 L)
Qtc0.80
Fc53 Hz
F3 (−3 dB, no cabin gain)50 Hz
Example box (outside)14 3/16″ × 14 3/16″ × 16 1/16″
Open sealed box in designer

Ported

Net volume2.93 ft³ (83 L)
Tuning (Fb)32 Hz
Portslot 2 3/8 × 14 5/16″, 25 5/16″ long
Port velocity at 550 W61 ft/s
F3 (−3 dB, no cabin gain)29 Hz
Example box (outside)31 1/2″ × 15 3/4″ × 16 1/16″
Open ported box in designer
203040506080100150200606672788490HzdB
Sealed Ported · SPL in dB at 1 W / 1 m, no cabin gain

Thiele/Small parameters

Fs35.1 Hz
Qts0.53
Qes0.581
Qms6
Vas1.64 ft³
Re (one coil)≈ 1.7 Ω
Sd≈ 76 in²
Xmax≈ 0.39″
EBP60 — sealed or ported calc.
Sensitivity, 1 W / 1 m87.4 dB calc.

General

Size12″
Voice coilsdual 2 Ω
RMS power550 W

Mounting dimensions

Ø12 3/8″cutout Ø11 1/8″mounting depth 6 1/4″magnet Ø≈ 7 1/4″
Cutout diameter11 1/8″
Mounting depth6 1/4″
Overall diameter12 3/8″

Only Qts is published — Qms assumed to be 6 and Qes calculated (barely affects box design).

“≈” means the value isn’t in the spec sheet and a typical value for the size is used; “calc.” means it’s calculated from the published parameters. Check the manufacturer’s spec sheet before you build.

Data sources

Other Swat 12″ models