Audiobahn AW1200V

12″ subwoofer · dual 4 Ω · 700 W RMS

35 HzFs, resonance
0.55Qts
1.84 ft³Vas
0.53″Xmax
700 WRMS

The Audiobahn AW1200V is a 12″ subwoofer. With Qts 0.55 and EBP 58 it works both sealed and ported: sealed is tighter and smaller, ported is deeper and louder.

Sourceweb.archive.org · manufacturer data
Checked against sourceOctober 2026
Thiele/Small parameterscomplete
Mounting dimensions3 of 4 — missing: magnet diameter; the designer will use an estimate

Recommended box

For a sedan, one sub, 700 W. It’s the same math as the designer’s step-by-step mode, where you can fit the box to your space, vehicle and amp and get plans, a cut sheet and DXF.

Sealed

smaller, tighter
1.59 ft³ (45 L)
Net volume
Bass character (Qtc)Tight and punchy · 0.81
Fc51 Hz
F3 (−3 dB, no cabin gain)48 Hz
Example box (outside)31 1/2″ × 15 3/4″ × 8 3/16″
Open sealed box in designer

Ported

deeper, louder
1.48 ft³ (42 L)
Net volume
Tuning (Fb)35 Hz
Portslot 1 9/16 × 14 5/16″, 29 1/4″ long
Port velocity at 700 W63 ft/s
F3 (−3 dB, no cabin gain)37 Hz
Example box (outside)31 1/2″ × 15 3/4″ × 9 7/8″
Open ported box in designer

Deeper: 2.72 ft³ (77 L) tuned to 35 Hz, 31 1/2″ × 15 3/4″ × 15 1/4″ outside — a bigger box with flatter deep bass. Open in the calculator

Where to buy Amazon
203040506080100150200667278849096HzdB
Sealed Ported · SPL in dB at 1 W / 1 m, no cabin gain

Thiele/Small parameters

Size12″
Voice coilsdual 4 Ω
RMS power700 W
Fs35 Hz
Qts0.55
Qes0.602
Qms6.53
Vas1.84 ft³
Re (one coil)3.8 Ω
Sd69.8 in²
Xmax0.53″
Vd37.1 in³ calc.
Mms114 g calc.
BL12.6 T·m calc.
EBP58 — sealed or ported calc.
Sensitivity, 1 W / 1 m87.7 dB calc.

Mounting dimensions

Ø12 3/4″cutout Ø11 1/8″mounting depth 5 5/8″magnet Ø≈ 7 1/4″
Cutout diameter11 1/8″
Mounting depth5 5/8″
Overall diameter12 3/4″

Where it fits in a vehicle

Spots from our vehicle guides where the cutout, mounting depth and recommended box fit. The spot sizes are approximate — measure your own vehicle.

“≈” means the value isn’t in the spec sheet and a typical value for the size is used; “calc.” means it’s calculated from the published parameters. Check the manufacturer’s spec sheet before you build.

Data sources

Other Audiobahn 12″ models

Similar 12″ subwoofers from other brands

Close in Fs, Qts and Vas — a box of similar volume will suit them.

FAQ

What box does the Audiobahn AW1200V need?

Recommended net volume: 1.59 ft³ sealed, 1.48 ft³ ported tuned to 35 Hz — for one sub in a sedan at 700 W. Fit the box to your space and amp in the free calculator, with plans and a cut sheet.

What are the Audiobahn AW1200V Thiele/Small specs?

Fs 35 Hz, Qts 0.55, Vas 1.84 ft³, Xmax 0.53″, Sd 69.8 in².

What is the Audiobahn AW1200V mounting depth?

Mounting depth is 5 5/8″, cutout diameter 11 1/8″. The inside depth of the box must exceed the mounting depth by at least 1″.

How much power does the Audiobahn AW1200V handle and how do I wire it?

RMS power rating: 700 W. Dual 4 Ω voice coils: series gives 8 Ω, parallel gives 2 Ω at the amp. Wiring for several subs and amp power — in the wiring calculator.

Is the Audiobahn AW1200V better sealed or ported?

EBP 58: both work — sealed 1.59 ft³ is tighter and smaller, ported 1.48 ft³ tuned to 35 Hz is deeper and louder.

What port does the Audiobahn AW1200V need?

For the 1.48 ft³ ported box tuned to 35 Hz: slot 1 9/16 × 14 5/16″, 29 1/4″ long, area 22.6 in²; or a round port Ø5 3/8″, ≈ 29 1/4″ long. Port air speed at 700 W: 63 ft/s.

What box do two Audiobahn AW1200V subs need?

Two subs need twice the volume: 3.18 ft³ sealed, or 2.97 ft³ ported at the same 35 Hz tuning with twice the port area. One shared chamber or one per sub — whatever fits your vehicle.