Quantum Audio QWX2000/10D4

10″ subwoofer · dual 4 Ω · 500 W RMS

39.4 HzFs, resonance
0.61Qts
0.85 ft³Vas
0.51″Xmax
500 WRMS

The Quantum Audio QWX2000/10D4 is a 10″ subwoofer. With Qts 0.61 and EBP 56 it works both sealed and ported: sealed is tighter and smaller, ported is deeper and louder.

Sourceweb.archive.org, dbdrive.net · manufacturer data
Checked against sourceOctober 2026
Thiele/Small parameterscomplete
Mounting dimensions2 of 4 — missing: mounting depth, magnet diameter; the designer will use an estimate

Recommended box

For a sedan, one sub, 500 W. It’s the same math as the designer’s step-by-step mode, where you can fit the box to your space, vehicle and amp and get plans, a cut sheet and DXF.

Sealed

smaller, tighter
1.17 ft³ (33 L)
Net volume
Bass character (Qtc)Tight and punchy · 0.80
Fc52 Hz
F3 (−3 dB, no cabin gain)48 Hz
Example box (outside)12 5/8″ × 12 5/8″ × 18 3/8″
Open sealed box in designer

Ported

deeper, louder
0.81 ft³ (23 L)
Net volume
Tuning (Fb)38 Hz
Portslot 1 × 14 5/16″, 29 1/16″ long
Port velocity at 500 W66 ft/s
F3 (−3 dB, no cabin gain)38 Hz
Example box (outside)15 3/16″ × 15 3/4″ × 12 3/8″
Open ported box in designer

Deeper: 1.98 ft³ (56 L) tuned to 34 Hz, 31 1/2″ × 15 3/4″ × 12″ outside — a bigger box with flatter deep bass. Open in the calculator

Where to buy Amazon
203040506080100150200606672788490HzdB
Sealed Ported · SPL in dB at 1 W / 1 m, no cabin gain

Thiele/Small parameters

Size10″
Voice coilsdual 4 Ω
RMS power500 W
Fs39.4 Hz
Qts0.61
Qes0.702
Qms4.6
Vas0.85 ft³
Re (one coil)3.6 Ω
Sd51.2 in²
Xmax0.51″
Vd26.2 in³ calc.
Mms104 g calc.
BL11.5 T·m calc.
EBP56 — sealed or ported calc.
Sensitivity, 1 W / 1 m85.2 dB calc.

Mounting dimensions

Ø10 13/16″cutout Ø9 1/4″mounting depth ≈ 5 1/8″magnet Ø≈ 6″
Cutout diameter9 1/4″
Mounting depth≈ 5 1/8″
Overall diameter10 13/16″

Where it fits in a vehicle

Spots from our vehicle guides where the cutout, mounting depth and recommended box fit. The spot sizes are approximate — measure your own vehicle.

“≈” means the value isn’t in the spec sheet and a typical value for the size is used; “calc.” means it’s calculated from the published parameters. Check the manufacturer’s spec sheet before you build.

Data sources

Other Quantum Audio 10″ models

Similar 10″ subwoofers from other brands

Close in Fs, Qts and Vas — a box of similar volume will suit them.

FAQ

What box does the Quantum Audio QWX2000/10D4 need?

Recommended net volume: 1.17 ft³ sealed, 0.81 ft³ ported tuned to 38 Hz — for one sub in a sedan at 500 W. Fit the box to your space and amp in the free calculator, with plans and a cut sheet.

What are the Quantum Audio QWX2000/10D4 Thiele/Small specs?

Fs 39.4 Hz, Qts 0.61, Vas 0.85 ft³, Xmax 0.51″, Sd 51.2 in².

How much power does the Quantum Audio QWX2000/10D4 handle and how do I wire it?

RMS power rating: 500 W. Dual 4 Ω voice coils: series gives 8 Ω, parallel gives 2 Ω at the amp. Wiring for several subs and amp power — in the wiring calculator.

Is the Quantum Audio QWX2000/10D4 better sealed or ported?

EBP 56: both work — sealed 1.17 ft³ is tighter and smaller, ported 0.81 ft³ tuned to 38 Hz is deeper and louder.

What port does the Quantum Audio QWX2000/10D4 need?

For the 0.81 ft³ ported box tuned to 38 Hz: slot 1 × 14 5/16″, 29 1/16″ long, area 14.1 in²; or a round port Ø4 1/4″, ≈ 29 1/16″ long. Port air speed at 500 W: 66 ft/s.

What box do two Quantum Audio QWX2000/10D4 subs need?

Two subs need twice the volume: 2.33 ft³ sealed, or 1.62 ft³ ported at the same 38 Hz tuning with twice the port area. One shared chamber or one per sub — whatever fits your vehicle.