American Bass VFLCOMP-1211
12″ subwoofer · dual 1 Ω · 5,000 W RMS
Fs 35 HzQts 0.40Vas 0.60 ft³Xmax 1.08″
Recommended box
For a sedan, one sub, 5,000 W. It’s the same math as the designer’s step-by-step mode, where you can fit the box to your space, vehicle and amp and get plans, a cut sheet and DXF.
Sealed
| Net volume | 0.95 ft³ (27 L) |
|---|---|
| Qtc | 0.52 |
| Fc | 45 Hz |
| F3 (−3 dB, no cabin gain) | 68 Hz |
| Example box (outside) | 14 9/16″ × 14 9/16″ × 12″ |
Ported
| Net volume | 1.48 ft³ (42 L) |
|---|---|
| Tuning (Fb) | 28 Hz |
| Port | 2 round ports Ø2 1/2″, 21 1/16″ long |
| Port velocity at 5,000 W | 464 ft/s |
| F3 (−3 dB, no cabin gain) | 26 Hz |
| Example box (outside) | 21 9/16″ × 15 3/4″ × 12″ |
Thiele/Small parameters
| Fs | 35 Hz |
|---|---|
| Qts | 0.40 |
| Qes | 0.446 |
| Qms | 4.39 |
| Vas | 0.60 ft³ |
| Re (one coil) | ≈ 0.85 Ω |
| Sd | 77.2 in² |
| Xmax | 1.08″ |
| Vd | 83.6 in³ calc. |
| Mms | 425 g calc. |
| BL | 13.3 T·m calc. |
| EBP | 78 — sealed or ported calc. |
| Sensitivity, 1 W / 1 m | 84.2 dB calc. |
General
| Size | 12″ |
|---|---|
| Voice coils | dual 1 Ω |
| RMS power | 5,000 W |
Mounting dimensions
| Cutout diameter | 11 5/16″ |
|---|---|
| Mounting depth | 9 1/2″ |
Cone area (Sd) calculated from Fs, Vas and Mms: 77.2 in².
“≈” means the value isn’t in the spec sheet and a typical value for the size is used; “calc.” means it’s calculated from the published parameters. Check the manufacturer’s spec sheet before you build.
Data sources
Other American Bass 12″ models
- American Bass DX-124 12″ · 4 Ω
- American Bass DX-124v2 12″ · 4 Ω
- American Bass ELITE-1222 12″ · dual 2 Ω
- American Bass ELITE-1244 12″ · dual 4 Ω
- American Bass ES-1244 12″ · dual 4 Ω
- American Bass GF-1211 12″ · dual 1 Ω
- American Bass GODZILLA-1211 12″ · dual 1 Ω
- American Bass GODZILLA-1222 12″ · dual 2 Ω
- American Bass HAWK-1244 12″ · dual 4 Ω
- American Bass HAWKSLIM-1244 12″ · dual 4 Ω
- American Bass HD-1211 12″ · dual 1 Ω
- American Bass HD-1222 12″ · dual 2 Ω