Polk Audio MM124 (Polk/MOMO)

12″ subwoofer · 4 Ω

27.5 HzFs, resonance
0.46Qts
2.86 ft³Vas
0.98″Xmax

The Polk Audio MM124 (Polk/MOMO) is a 12″ subwoofer. With Qts 0.46 and EBP 58 it works both sealed and ported: sealed is tighter and smaller, ported is deeper and louder. Long excursion (Xmax 0.98″) — built for loud music and high power.

Sourceweb.archive.org · manufacturer data
Checked against sourceOctober 2026
Thiele/Small parameterscomplete
Mounting dimensions2 of 4 — missing: frame outer diameter, magnet diameter; the designer will use an estimate

Recommended box

For a sedan, one sub, 300 W. It’s the same math as the designer’s step-by-step mode, where you can fit the box to your space, vehicle and amp and get plans, a cut sheet and DXF.

Sealed

smaller, tighter
1.41 ft³ (40 L)
Net volume
Bass character (Qtc)Tight and punchy · 0.80
Fc48 Hz
F3 (−3 dB, no cabin gain)45 Hz
Example box (outside)14 3/16″ × 14 3/16″ × 17 9/16″
Open sealed box in designer

Ported

deeper, louder
2.30 ft³ (65 L)
Net volume
Tuning (Fb)30 Hz
Portslot 1 9/16 × 14 5/16″, 25 1/4″ long
Port velocity at 300 W53 ft/s
F3 (−3 dB, no cabin gain)30 Hz
Example box (outside)31 1/2″ × 15 3/4″ × 12 7/8″
Open ported box in designer

Deeper: 3.07 ft³ (87 L) tuned to 30 Hz, 31 1/2″ × 15 3/4″ × 15 3/4″ outside — a bigger box with flatter deep bass. Open in the calculator

Where to buy Amazon
203040506080100150200606672788490HzdB
Sealed Ported · SPL in dB at 1 W / 1 m, no cabin gain

Thiele/Small parameters

Size12″
Voice coils4 Ω
RMS power—
Fs27.5 Hz
Qts0.46
Qes0.476
Qms13.06
Vas2.86 ft³
Re3.8 Ω
Sd79.2 in²
Xmax0.98″
Vd78 in³ calc.
Mms153 g calc.
BL14.5 T·m calc.
EBP58 — sealed or ported calc.
Sensitivity, 1 W / 1 m87.5 dB calc.

Mounting dimensions

Ø≈ 12 5/16″cutout Ø11 1/8″mounting depth 6″magnet Ø≈ 7 1/4″
Cutout diameter11 1/8″
Mounting depth6″

Where it fits in a vehicle

Spots from our vehicle guides where the cutout, mounting depth and recommended box fit. The spot sizes are approximate — measure your own vehicle.

“≈” means the value isn’t in the spec sheet and a typical value for the size is used; “calc.” means it’s calculated from the published parameters. Check the manufacturer’s spec sheet before you build.

Data sources

Other Polk Audio 12″ models

Similar 12″ subwoofers from other brands

Close in Fs, Qts and Vas — a box of similar volume will suit them.

FAQ

What box does the Polk Audio MM124 (Polk/MOMO) need?

Recommended net volume: 1.41 ft³ sealed, 2.30 ft³ ported tuned to 30 Hz — for one sub in a sedan at 300 W. Fit the box to your space and amp in the free calculator, with plans and a cut sheet.

What are the Polk Audio MM124 (Polk/MOMO) Thiele/Small specs?

Fs 27.5 Hz, Qts 0.46, Vas 2.86 ft³, Xmax 0.98″, Sd 79.2 in².

What is the Polk Audio MM124 (Polk/MOMO) mounting depth?

Mounting depth is 6″, cutout diameter 11 1/8″. The inside depth of the box must exceed the mounting depth by at least 1″.

Is the Polk Audio MM124 (Polk/MOMO) better sealed or ported?

EBP 58: both work — sealed 1.41 ft³ is tighter and smaller, ported 2.30 ft³ tuned to 30 Hz is deeper and louder.

What port does the Polk Audio MM124 (Polk/MOMO) need?

For the 2.30 ft³ ported box tuned to 30 Hz: slot 1 9/16 × 14 5/16″, 25 1/4″ long, area 22.6 in²; or a round port Ø5 3/8″, ≈ 25 1/4″ long. Port air speed at 300 W: 53 ft/s.

What box do two Polk Audio MM124 (Polk/MOMO) subs need?

Two subs need twice the volume: 2.83 ft³ sealed, or 4.59 ft³ ported at the same 30 Hz tuning with twice the port area. One shared chamber or one per sub — whatever fits your vehicle.