Orion XTR 12 DVC (original)

12″ subwoofer · dual 4 Ω

24 HzFs, resonance
0.39Qts
5.54 ft³Vas
0.30″Xmax

The Orion XTR 12 DVC (original) is a shallow 12″ sub (5″ mounting depth): it fits behind a truck seat or in a slim box. With Qts 0.39 and EBP 50 it works both sealed and ported: sealed is tighter and smaller, ported is deeper and louder. Modest excursion (Xmax 0.30″) — for clean sound at moderate levels, not for SPL competitions.

Sourceweb.archive.org · manufacturer data
Checked against sourceOctober 2026
Thiele/Small parameterscomplete
Mounting dimensions3 of 4 — missing: magnet diameter; the designer will use an estimate

Recommended box

For a sedan, one sub, 300 W. It’s the same math as the designer’s step-by-step mode, where you can fit the box to your space, vehicle and amp and get plans, a cut sheet and DXF.

Sealed

smaller, tighter
1.77 ft³ (50 L)
Net volume
Bass character (Qtc)Tight and punchy · 0.80
Fc49 Hz
F3 (−3 dB, no cabin gain)47 Hz
Example box (outside)31 1/2″ × 15 3/4″ × 8 15/16″
Open sealed box in designer

Ported

deeper, louder
2.30 ft³ (65 L)
Net volume
Tuning (Fb)30 Hz
Portslot 1 9/16 × 14 5/16″, 25 1/4″ long
Port velocity at 300 W43 ft/s
F3 (−3 dB, no cabin gain)34 Hz
Example box (outside)31 1/2″ × 15 3/4″ × 12 7/8″
Open ported box in designer

Deeper: 3.04 ft³ (86 L) tuned to 33 Hz, 31 1/2″ × 15 3/4″ × 15″ outside — a bigger box with flatter deep bass. Open in the calculator

Where to buy Amazon
203040506080100150200667278849096HzdB
Sealed Ported · SPL in dB at 1 W / 1 m, no cabin gain

Thiele/Small parameters

Size12″
Voice coilsdual 4 Ω
RMS power—
Fs24 Hz
Qts0.39
Qes0.48
Qms2.17
Vas5.54 ft³
Re (one coil)3.95 Ω
Sd78 in²
Xmax0.30″
Vd23 in³ calc.
Mms101 g calc.
BL11.2 T·m calc.
EBP50 — sealed or ported calc.
Sensitivity, 1 W / 1 m88.6 dB calc.

Mounting dimensions

Ø12 1/2″cutout Ø11 1/8″mounting depth 5″magnet Ø≈ 7 1/4″
Cutout diameter11 1/8″
Mounting depth5″
Overall diameter12 1/2″

Where it fits in a vehicle

Spots from our vehicle guides where the cutout, mounting depth and recommended box fit. The spot sizes are approximate — measure your own vehicle.

“≈” means the value isn’t in the spec sheet and a typical value for the size is used; “calc.” means it’s calculated from the published parameters. Check the manufacturer’s spec sheet before you build.

Data sources

Voice coil versions

The same sub with different voice coils: the parameters are nearly the same — pick by your amp and wiring.

ModelVoice coilsReQesVasSealedPorted
Orion XTR 12 SVC (original)4 Ω3.6 Ω0.697.35 ft³1.77 ft³2.30 ft³ · 31 Hz
Orion XTR 12 DVC (original)dual 4 Ω3.95 Ω0.485.54 ft³1.77 ft³2.30 ft³ · 30 Hz

Other Orion 12″ models

Similar 12″ subwoofers from other brands

Close in Fs, Qts and Vas — a box of similar volume will suit them.

FAQ

What box does the Orion XTR 12 DVC (original) need?

Recommended net volume: 1.77 ft³ sealed, 2.30 ft³ ported tuned to 30 Hz — for one sub in a sedan at 300 W. Fit the box to your space and amp in the free calculator, with plans and a cut sheet.

What are the Orion XTR 12 DVC (original) Thiele/Small specs?

Fs 24 Hz, Qts 0.39, Vas 5.54 ft³, Xmax 0.30″, Sd 78 in².

What is the Orion XTR 12 DVC (original) mounting depth?

Mounting depth is 5″, cutout diameter 11 1/8″. The inside depth of the box must exceed the mounting depth by at least 1″.

Is the Orion XTR 12 DVC (original) better sealed or ported?

EBP 50: both work — sealed 1.77 ft³ is tighter and smaller, ported 2.30 ft³ tuned to 30 Hz is deeper and louder.

What port does the Orion XTR 12 DVC (original) need?

For the 2.30 ft³ ported box tuned to 30 Hz: slot 1 9/16 × 14 5/16″, 25 1/4″ long, area 22.6 in²; or a round port Ø5 3/8″, ≈ 25 1/4″ long. Port air speed at 300 W: 43 ft/s.

What box do two Orion XTR 12 DVC (original) subs need?

Two subs need twice the volume: 3.53 ft³ sealed, or 4.59 ft³ ported at the same 30 Hz tuning with twice the port area. One shared chamber or one per sub — whatever fits your vehicle.