Audiobahn AW1251

12″ subwoofer · 400 W RMS

25.3 HzFs, resonance
0.40Qts
5.05 ft³Vas
0.28″Xmax
400 WRMS

The Audiobahn AW1251 is a 12″ subwoofer. With Qts 0.40 and EBP 59 it works both sealed and ported: sealed is tighter and smaller, ported is deeper and louder. Modest excursion (Xmax 0.28″) — for clean sound at moderate levels, not for SPL competitions.

Sourceweb.archive.org · manufacturer data
Checked against sourceOctober 2026
Thiele/Small parametersnot in the spec sheet: Sd — typical value for the size used
Mounting dimensions3 of 4 — missing: magnet diameter; the designer will use an estimate

Recommended box

For a sedan, one sub, 400 W. It’s the same math as the designer’s step-by-step mode, where you can fit the box to your space, vehicle and amp and get plans, a cut sheet and DXF.

Sealed

smaller, tighter
1.73 ft³ (49 L)
Net volume
Bass character (Qtc)Tight and punchy · 0.80
Fc50 Hz
F3 (−3 dB, no cabin gain)48 Hz
Example box (outside)31 1/2″ × 15 3/4″ × 8 3/4″
Open sealed box in designer

Ported

deeper, louder
2.26 ft³ (64 L)
Net volume
Tuning (Fb)30 Hz
Portslot 1 9/16 × 14 5/16″, 25 3/4″ long
Port velocity at 400 W52 ft/s
F3 (−3 dB, no cabin gain)34 Hz
Example box (outside)31 1/2″ × 15 3/4″ × 12 3/4″
Open ported box in designer

Deeper: 2.93 ft³ (83 L) tuned to 34 Hz, 31 1/2″ × 15 3/4″ × 14 13/16″ outside — a bigger box with flatter deep bass. Open in the calculator

Where to buy Amazon
203040506080100150200667278849096HzdB
Sealed Ported · SPL in dB at 1 W / 1 m, no cabin gain

Thiele/Small parameters

Size12″
Voice coils—
RMS power400 W
Fs25.3 Hz
Qts0.40
Qes0.43
Qms6.57
Vas5.05 ft³
Re3.2 Ω
Sd≈ 76 in²
Xmax0.28″
EBP59 — sealed or ported calc.
Sensitivity, 1 W / 1 m89.3 dB calc.

Mounting dimensions

Ø12 1/2″cutout Ø10 7/8″mounting depth 5 1/4″magnet Ø≈ 7 1/16″
Cutout diameter10 7/8″
Mounting depth5 1/4″
Overall diameter12 1/2″

Where it fits in a vehicle

Spots from our vehicle guides where the cutout, mounting depth and recommended box fit. The spot sizes are approximate — measure your own vehicle.

“≈” means the value isn’t in the spec sheet and a typical value for the size is used; “calc.” means it’s calculated from the published parameters. Check the manufacturer’s spec sheet before you build.

Data sources

Other Audiobahn 12″ models

Similar 12″ subwoofers from other brands

Close in Fs, Qts and Vas — a box of similar volume will suit them.

FAQ

What box does the Audiobahn AW1251 need?

Recommended net volume: 1.73 ft³ sealed, 2.26 ft³ ported tuned to 30 Hz — for one sub in a sedan at 400 W. Fit the box to your space and amp in the free calculator, with plans and a cut sheet.

What are the Audiobahn AW1251 Thiele/Small specs?

Fs 25.3 Hz, Qts 0.40, Vas 5.05 ft³, Xmax 0.28″.

What is the Audiobahn AW1251 mounting depth?

Mounting depth is 5 1/4″, cutout diameter 10 7/8″. The inside depth of the box must exceed the mounting depth by at least 1″.

How much power does the Audiobahn AW1251 handle and how do I wire it?

RMS power rating: 400 W. Wiring for several subs and amp power — in the wiring calculator.

Is the Audiobahn AW1251 better sealed or ported?

EBP 59: both work — sealed 1.73 ft³ is tighter and smaller, ported 2.26 ft³ tuned to 30 Hz is deeper and louder.

What port does the Audiobahn AW1251 need?

For the 2.26 ft³ ported box tuned to 30 Hz: slot 1 9/16 × 14 5/16″, 25 3/4″ long, area 22.6 in²; or a round port Ø5 3/8″, ≈ 25 3/4″ long. Port air speed at 400 W: 52 ft/s.

What box do two Audiobahn AW1251 subs need?

Two subs need twice the volume: 3.46 ft³ sealed, or 4.52 ft³ ported at the same 30 Hz tuning with twice the port area. One shared chamber or one per sub — whatever fits your vehicle.