Elemental Designs 13Ov.2

12″ subwoofer · DVC · 600 W RMS

21 HzFs, resonance
0.27Qts
6.22 ft³Vas
0.72″Xmax
600 WRMS

The Elemental Designs 13Ov.2 is a 12″ subwoofer. With Qts 0.27 and EBP 70 it works both sealed and ported: sealed is tighter and smaller, ported is deeper and louder.

Sourceweb.archive.org · manufacturer data
Checked against sourceOctober 2026
Thiele/Small parameterscomplete
Mounting dimensions3 of 4 — missing: magnet diameter; the designer will use an estimate
The published specs don’t add up:

Recommended box

For a sedan, one sub, 600 W. It’s the same math as the designer’s step-by-step mode, where you can fit the box to your space, vehicle and amp and get plans, a cut sheet and DXF.

Sealed

smaller, tighter
0.85 ft³ (24 L)
Net volume
Bass character (Qtc)Tight and punchy · 0.79
Fc61 Hz
F3 (−3 dB, no cabin gain)59 Hz
Example box (outside)14 3/16″ × 14 3/16″ × 11 9/16″
Open sealed box in designer

Ported

deeper, louder
2.51 ft³ (71 L)
Net volume
Tuning (Fb)30 Hz
Portslot 1 15/16 × 14 5/16″, 29″ long
Port velocity at 600 W62 ft/s
F3 (−3 dB, no cabin gain)32 Hz
Example box (outside)31 1/2″ × 15 3/4″ × 14 3/8″
Open ported box in designer

Deeper: 2.30 ft³ (65 L) tuned to 31 Hz, 31 1/2″ × 15 3/4″ × 13 9/16″ outside — a bigger box with flatter deep bass. Open in the calculator

Where to buy Amazon
203040506080100150200606672788490HzdB
Sealed Ported · SPL in dB at 1 W / 1 m, no cabin gain

Thiele/Small parameters

Size12″
Voice coilsDVC
RMS power600 W
Fs21 Hz
Qts0.27
Qes0.3
Qms3.3
Vas6.22 ft³
Re (one coil)4.15 Ω
Sd84.5 in²
Xmax0.72″
Vd60.9 in³ calc.
Mms137 g calc.
BL15.8 T·m calc.
EBP70 — sealed or ported calc.
Sensitivity, 1 W / 1 m89.4 dB calc.

Mounting dimensions

Ø12 3/8″cutout Ø11″mounting depth 6 5/8″magnet Ø≈ 7 1/8″
Cutout diameter11″
Mounting depth6 5/8″
Overall diameter12 3/8″

Where it fits in a vehicle

Spots from our vehicle guides where the cutout, mounting depth and recommended box fit. The spot sizes are approximate — measure your own vehicle.

“≈” means the value isn’t in the spec sheet and a typical value for the size is used; “calc.” means it’s calculated from the published parameters. Check the manufacturer’s spec sheet before you build.

Data sources

Other Elemental Designs 12″ models

Similar 12″ subwoofers from other brands

Close in Fs, Qts and Vas — a box of similar volume will suit them.

FAQ

What box does the Elemental Designs 13Ov.2 need?

Recommended net volume: 0.85 ft³ sealed, 2.51 ft³ ported tuned to 30 Hz — for one sub in a sedan at 600 W. Fit the box to your space and amp in the free calculator, with plans and a cut sheet.

What are the Elemental Designs 13Ov.2 Thiele/Small specs?

Fs 21 Hz, Qts 0.27, Vas 6.22 ft³, Xmax 0.72″, Sd 84.5 in².

What is the Elemental Designs 13Ov.2 mounting depth?

Mounting depth is 6 5/8″, cutout diameter 11″. The inside depth of the box must exceed the mounting depth by at least 1″.

How much power does the Elemental Designs 13Ov.2 handle and how do I wire it?

RMS power rating: 600 W. Wiring for several subs and amp power — in the wiring calculator.

Is the Elemental Designs 13Ov.2 better sealed or ported?

EBP 70: both work — sealed 0.85 ft³ is tighter and smaller, ported 2.51 ft³ tuned to 30 Hz is deeper and louder.

What port does the Elemental Designs 13Ov.2 need?

For the 2.51 ft³ ported box tuned to 30 Hz: slot 1 15/16 × 14 5/16″, 29″ long, area 28.2 in²; or a round port Ø6″, ≈ 29″ long. Port air speed at 600 W: 62 ft/s.

What box do two Elemental Designs 13Ov.2 subs need?

Two subs need twice the volume: 1.70 ft³ sealed, or 5.01 ft³ ported at the same 30 Hz tuning with twice the port area. One shared chamber or one per sub — whatever fits your vehicle.