Elemental Designs E12o
12″ subwoofer · DVC · 1,000 W RMS
| Source | web.archive.org · manufacturer data |
|---|---|
| Checked against source | October 2026 |
| Thiele/Small parameters | not in the spec sheet: Sd — typical value for the size used |
| Mounting dimensions | 1 of 4 — missing: mounting depth, frame outer diameter, magnet diameter; the designer will use an estimate |
Recommended box
For a sedan, one sub, 1,000 W. It’s the same math as the designer’s step-by-step mode, where you can fit the box to your space, vehicle and amp and get plans, a cut sheet and DXF.
Sealed
smaller, tighter| Bass character (Qtc) | Dry and tight · 0.49 |
|---|---|
| Fc | 55 Hz |
| F3 (−3 dB, no cabin gain) | 90 Hz |
| Example box (outside) | 14 9/16″ × 14 9/16″ × 9 9/16″ |
Ported
deeper, louder| Tuning (Fb) | 34 Hz |
|---|---|
| Port | slot 3 1/8 × 14 5/16″, 40 5/8″ long |
| Port velocity at 1,000 W | 64 ft/s |
| F3 (−3 dB, no cabin gain) | 32 Hz |
| Example box (outside) | 31 1/2″ × 15 3/4″ × 15 7/8″ |
Deeper: 1.45 ft³ (41 L) tuned to 32 Hz, 31 1/2″ × 15 3/4″ × 10 7/8″ outside — a bigger box with flatter deep bass. Open in the calculator
Projects with this subwoofer
Boxes that users designed and published: plans, cut sheet and response graph.
Thiele/Small parameters
| Size | 12″ |
|---|---|
| Voice coils | DVC |
| RMS power | 1,000 W |
| Fs | 31 Hz |
| Qts | 0.28 |
| Qes | 0.29 |
| Qms | 6.2 |
| Vas | 1.52 ft³ |
|---|---|
| Re (one coil) | 1.9 Ω |
| Sd | ≈ 76 in² |
| Xmax | 0.75″ |
| EBP | 107 — suits ported calc. |
| Sensitivity, 1 W / 1 m | 88.5 dB calc. |
Mounting dimensions
| Cutout diameter | 11 1/4″ |
|---|---|
| Mounting depth | ≈ 5 7/8″ |
“≈” means the value isn’t in the spec sheet and a typical value for the size is used; “calc.” means it’s calculated from the published parameters. Check the manufacturer’s spec sheet before you build.
Data sources
Other Elemental Designs 12″ models
- Elemental Designs 13Kv.2 12″ · DVC
- Elemental Designs 13Ov.2 12″ · DVC
- Elemental Designs e3.12 12″ · dual 2 Ω
- Elemental Designs e5.12 12″ · dual 2 Ω
- Elemental Designs E12a (2002) 12″ · DVC
- Elemental Designs e12A (2003) 12″
- Elemental Designs E12k (2002) 12″
- Elemental Designs e12K (2003) 12″ · DVC
- Elemental Designs e12kd4 12″ · DVC
- Elemental Designs e12O.14 12″ · 4 Ω
- Elemental Designs e12O.44 12″ · dual 4 Ω
Similar 12″ subwoofers from other brands
Close in Fs, Qts and Vas — a box of similar volume will suit them.
- Gladen SQX 12 Extreme (SVC 2 ohm) 0.71 ft³ sealed · 2.26 ft³ ported
- PSI Platform 3 12 0.71 ft³ sealed · 2.26 ft³ ported
- Hertz Hi-Energy HX 300 D (DVC 4+4 ohm) 0.71 ft³ sealed · 1.24 ft³ ported
- SPL Dynamics XTR-300D2 0.74 ft³ sealed · 2.40 ft³ ported
- Pride LC V.2 12 D2 0.78 ft³ sealed · 2.47 ft³ ported
- SoundQubed HDS2.212 D2 0.71 ft³ sealed · 2.33 ft³ ported
FAQ
What box does the Elemental Designs E12o need?
Recommended net volume: 0.71 ft³ sealed, 2.26 ft³ ported tuned to 34 Hz — for one sub in a sedan at 1,000 W. Fit the box to your space and amp in the free calculator, with plans and a cut sheet.
What are the Elemental Designs E12o Thiele/Small specs?
Fs 31 Hz, Qts 0.28, Vas 1.52 ft³, Xmax 0.75″.
How much power does the Elemental Designs E12o handle and how do I wire it?
RMS power rating: 1,000 W. Wiring for several subs and amp power — in the wiring calculator.